Rogers to Feature Advanced Materials Technology, Capabilities for Antennas at IEEE AP-S
July 5, 2022 | Rogers CorporationEstimated reading time: 1 minute
Rogers Corporation will exhibit at the IEEE International Symposium on Antennas & Propagation (IEEE AP-S) in Denver, CO (Booth #400) on July 12-14.
The IEEE AP-S conference is intended to provide an international forum for the exchange of information on state-of-the-art research in antennas, propagation, electromagnetic engineering and radio science.
Key Rogers’ products being featured include:
Recently introduced Radix™ 3D Printable Dielectrics family of products, with the first available material featuring a dielectric constant of 2.8 and low loss characteristics at microwave frequencies. These printable dielectric materials give radio frequency (RF) designers unprecedented design freedom in creating new components, eliminating the need to consider typical manufacturing design constraints.
Radix 3D Printable Dielectrics are proprietary composite materials designed for the scalable manufacture of gradient index and controlled dk 3D structures, through a scalable, high-resolution printing process for end-use RF dielectric component manufacturing. Rogers Corporation’s first Radix 3D Printable Dielectric material has a targeted dielectric constant of 2.8 and a dissipation factor of 0.0043 at 10 GHz when cured.
MAGTREX® 555 High Impedance Laminates: The first commercially available low loss laminate with controlled and matched permeability and permittivity, enabling antenna designers to expand the trade-space of their antenna design, enabling design flexibility and optimization.
Rogers technical staff will be available to discuss the most demanding applications from Phase Array Radar Antennas, high frequency magneto-dielectric materials, ablative Radome materials, and metallized-shaped/3D ADM dielectric solutions.
Conference attendees can learn about “3D-Printed E-Band Gradient Dielectric Lens for Automotive and Industrial Applications” from Trevor Polidore of Rogers Corporation and Philip Lambert of 3DFortify at the 3D Printed Lens Antennas technical session on Friday July 15th starting at 3:20 p.m.
Suggested Items
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.