-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
February 2, 2024 | Andy Shaughnessy, I-Connect007Estimated reading time: 2 minutes
I’m writing this in Santa Clara, California on the last day of DesignCon. It was nice to get out of Atlanta, which was 28 degrees when I left. It’s a little rainy here, but it’s been in the 60s all week, and I’ll take that kind of weather any day.
In this week’s must-reads, we have a little bit of everything, including sad news about the passing of our columnist Michael Ford. Everyone who knew him just loved the guy.
I need to catch an Uber, so I’m keeping this short. Have a good weekend.
Rain or Shine, DesignCon 2024 is Happening
Published February 1
Yes, DesignCon seems to be a draw, regardless of weather. This show was busier than a one-armed paper-hanger, despite intermittent rain. It was great to see so many young people at this show. Is this industry becoming cool again? Everyone I met was bullish on their company and the industry overall. Let’s hope this is good omen for the rest of the year.
The Pulse: New Designer’s (Partial) Guide to Fabrication
Published January 31
What do designers need to know about fabrication? They don’t necessarily have to be manufacturing experts, but the more they know about fab processes, the more likely they’ll produce successful designs. Columnist Martyn Gaudion breaks down the manufacturing considerations that can affect the design’s signal integrity.
The New Chapter: Easing the Learning Curve for Young Professionals
Published January 31
Now that young people are once again entering the world of PCB design and manufacturing, many companies are focusing on updating their onboarding processes. In this column, Paige Fiet—out of college for only a few years—shares her thoughts on ways that companies can shorten the learning curve for new engineers, leaving them less anxious and more productive.
Electronics Industry Mourns Loss of Colleague and Visionary Michael Ford
Published January 31
We lost a really great guy this week. Michael Ford was an industry expert on everything related to CFX, Industry 4.0, and Smart manufacturing, and one of our most popular columnists. After he left Siemens for Aegis Software, one of the Siemens engineers joked that it might take two people to replace Michael. But more importantly, he was also a really nice guy, and a lot of fun. He enjoyed sharing his knowledge to make the industry a better place. Michael will be missed.
It’s Only Common Sense: What Are You Afraid Of?
Published January 29
In this column, Dan Beaulieu gets right to the point: What are you afraid of? Smart company managers are not afraid to take necessary risks, but some PCB companies are run by managers who are almost paralyzed with fear. As Dan says, get over your fear and take that risk; you’re actually more likely to fail if you don’t get over that fear. What are you afraid of, anyway?
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/26/2024 | Andy Shaughnessy, Design007 MagazineIn this week’s roundup, we have a variety of articles covering everything from design through assembly, and even box build. I’ve always wondered whether box build was all it was cracked up to be. Do customers really pick one EMS provider over another because one company offers box build? And if you’ve ever wanted to volunteer, IPC’s Thought Leaders Program is looking for a few good technologists to help them on their mission. Check out Stanton Rak’s article, which was published in the spring issue of IPC Community.
NCAB Group Posts Interim Report Q1 2024
04/26/2024 | NCAB GroupNet sales decreased by 17% to SEK 950.6 million (1,146.4). Compared with the year-earlier period, sales were affected bylower prices and continued inventory adjustments by customers. In USD, net sales decreased 17%. For comparable units, net sales decreased 24% in both SEK and USD.
Rogers Corporation Reports Q1 2024 Results
04/26/2024 | Rogers CorporationNet sales of $213.4 million increased 4.3% versus the prior quarter resulting from higher sales in the AES and EMS business units. AES net sales increased by 4.1% primarily related to higher aerospace and defense (A&D), wireless infrastructure, industrial and renewable energy sales, partially offset by lower EV/HEV and ADAS sales. EMS net sales increased by 2.8% primarily from higher general industrial, A&D and EV/HEV sales, partially offset by seasonally lower portable electronics sales.
Technica USA Presents Inaugural Supplier Alliance Award at IPC APEX EXPO 2024
04/24/2024 | Technica USADuring IPC APEX EXPO 2024, Technica USA took the opportunity to thank all of their supply partners that made the effort to join them for the exhibition in their booth, as well to all of our SMT partners that had their own booths, with the latest in automation and process technology.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.