Tips for Finding a Great PCB R&D Partner


Reading time ( words)

Editor’s Note: This new column, Standard of Excellence, represents a cooperative writing effort by a team of experts at American Standard Circuits (ASC). Each month, one team member will contribute a column that focuses on his specific area of expertise. In future months, Dave Lackey, VP Business Development, will discuss flex and rigid-flex PCBs; John Bushie, Application Engineering Manager, will examine RF and metal-backed PCBs; and Dave Olson, VP Operations, will discuss various aspects of operations. This month, we begin with CEO Anaya Vardya, who focuses on R&D.

Anaya_Vardya.jpgIt used to be that most of the R&D in our industry was handled by OEMs. If you think back to all of the large companies, from IBM to Raytheon, and from Rockwell to GE, you will recall that everyone had their own board shops and invested in their own R&D, which took care of most of the new technology innovations. Today, with all of those companies having jettisoned their shops, it is up to board shops like American Standard Circuits to take up the slack and provide this service for our customers.

As we look at future trends for electronics, at the core we see things like miniaturization, thermal management, signal integrity, and requirements for higher frequency/lower losses. Additionally, there are increasing electronics content in the automotive, medical and Internet of Things arenas.   

So if you are an OEM or a CEM, and particularly if you are involved in building products for the future— products that will need some new and innovative technologies—you will need a PCB fabricator who can help you, and someone you can trust with developing the technology to build the boards you will need in the future. It is also important to remember that sometimes new and innovative might only be new and innovative to you. We have seen a number of customers who design relatively simpler technologies now, while looking at flex and rigid-flex PCBs as a solution for future products. While these technologies have been around for a while, it can be a scary concept to embark on them without having any history with this technology. The right PCB supplier can help you with this.  

The following are suggestions for what you should look for in a good R&D PCB fabrication vendor partner:

  • A company that has the technical capabilities to handle your needs today and in the future
  • A company that has the right team of players to meet your needs, is easy to work with, is and willing to generously share knowledge
  • A company you can trust with your products and most importantly, has the ability to keep projects in confidence
  • A company with a history of investing in people, technology and equipment. A diverse product mix is also helpful, as solutions sometimes come from combining ideas (e.g., combining RF/microwave and flex materials)
  • A company that has a good relationship with its suppliers; remember, R&D is a team sport and requires not only the PCB fabricator but their supplier partners
  • A company that you can see yourself happily entering the future with

As a PCB company, look for the following characteristics in an R&D customer partner:

  • A company that will appreciate the value you bring to the project
  • A company that will be willing to pay the right price for your time, effort and technology
  • A company you can count on being with you for the long haul and will not pass your technology on to a lower priced competitor
  • A company that is easy to work with

Finally, a few things that a good R&D PCB fabricator should be expected to do for you:

  • Understand your goals and have the ability to develop and design boards that will get you there
  • Go beyond specs to focus on functionality
  • Develop a process to build your product
  • Take a risk and go “further than they have ever gone before” to develop a technology that will produce the boards you need, especially with new and innovating technology
  • Work side by side with you on the project
  • Act as your own personal inside board shop

As we look into the future, we will see that electronic content is growing. At the heart of this is a PCB. Some form of R&D will be the key to your success. Personally, I view R&D in two different ways—it could mean something brand new that really hasn’t been tried before or it could mean something that is new to you that can be a challenge in a number of different ways, including selling the concept to your management team, design tools, etc. A good PCB R&D partner can help you to reach your standard of excellence.

Anaya Vardya is CEO of American Standard Circuits, Inc.

Share

Print


Suggested Items

CES: Sands Show Floor and ShowStoppers

01/16/2020 | Dan Feinberg, Technology Editor, I-Connect007
Every year at CES, ShowStoppers and a similar event, Pepcom, demonstrate many new devices and technologies. Again, some will become devices we can’t live without, and some you will never hear about again. Seeing all of these new ideas is one of the highlights of attending CES. Enjoy this look at a potpourri of new, innovative high-tech products.

Future of 'Substances and Materials in Products' Data Exchange Formats as Standards

10/16/2019 | Jean-Pierre Theret, Dassault Systèmes
This article provides a simplified, state-of-the-art description of the data exchange formats for standards covering substances and materials reporting in products and processes. It also reviews existing issues and new challenges shared with end users of the standards and companies represented by their trade associations with some solution proposals they could discuss.

Creating Stability in Materials Chaos

06/06/2019 | Nolan Johnson, I-Connect007
Nolan Johnson and Tony Senese—manager, business development group, Panasonic EMBD—discuss the evolution of the materials marketplace over the years from a time when the market aligned for the rise of Panasonic’s MEGTRON 6 to the ever-changing materials industry of today. With the ramp-up to 5G and everyone pushing product development, Tony describes a chaotic materials market flooded with new companies and materials.



Copyright © 2020 I-Connect007. All rights reserved.