RoHS and PoPs Chemicals Found in Nearly 40% of Electronics in Sweden


Reading time ( words)

Sweden’s Chemical Agency (Kemi) found banned chemicals in nearly 40 percent of audited low-cost electrical and electronic products. The audits, which took place throughout 2016, revealed that the discount electronics category has a “high rate of noncompliance” with Swedish and European Union RoHS and Persistent Organic Pollutants (PoPs) requirements. Labeling and documentation obligations under REACH and other regulations were also frequently found to be absent.

During 2016, Kemi audited 84 companies and analyzed the chemical content of 154 products, with short-chain chlorinated paraffins (banned under the Stockholm Convention on (PoPs) and lead (banned under RoHS). Most of the products that were examined originated in China, included bike lights, headphones, USB cables and Christmas decorations.

Kemi reports manufacturers and importers for suspicion of crime when their products contain substances restricted under the RoHS Directive. When products contain substances which are restricted under the PoPs regulation or which are regulated under the REACH regulation, both manufacturers, importers and distributors are reported to the environmental prosecutor.

Share

Print


Suggested Items

IPC Standards Development: Business Challenges and an Inside View

10/28/2020 | Graham Naisbitt, Gen3 Systems
With increasing frequency, standardising the standards, such as ISO 9201, imposes certain rules that must be met to ensure “fair play” amongst the supply chain. There will be those familiar with hearing about “false positives/negatives” and “never trust the salesman,” so mitigating these is no easy task. However, there is the chance for each 5-30 Task Group to review industry requirements and set out the work program for the ensuing period. With that in mind, much of what follows is based on comments we learn about from our industry around the world, many of whom are not yet IPC members. Yes, this is a membership recruitment drive, unashamedly, as well as a search for volunteers willing to help create the standards of tomorrow.

SMTA Additive TechXchange Keynote: An Outlook on Advanced PCB Fab

10/20/2020 | Pete Starkey, I-Connect007
Organised as a virtual event by Lenora Clark of ESI Automotive and Tara Dunn of Omni PCB, SMTA’s Additive TechXchange addressed additive technology specifically in the context of the electronics industry. Pete Starkey details the keynote presentation, an outlook on advanced printed circuit board fabrication, from Jeff Doubrava, managing partner at Prismark Partners.

90% Solder Dross Recovery: Eliminate Waste, Save Money

10/20/2020 | Nolan Johnson, I-Connect007
The impact of 90% solder dross recovery can have a substantial impact on reducing waste and increasing cost savings. Nolan Johnson recently spoke with Jay Hardin, MS2® product manager at P. Kay Metal, about the process and benefits of efficient solder dross recovery, as well as product roadmaps, the soldering machine market, and raw materials supply chain for solder alloy manufacturing. As Jay says, “For many companies, the savings are in the thousands or millions” of dollars.



Copyright © 2020 I-Connect007. All rights reserved.