-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Enough Blame to Go Around
September 4, 2017 | Scott Decker, CID+, UTC Aerospace SystemsEstimated reading time: 2 minutes
The idea for this article began a few months ago when The PCB Design Magazine conducted a reader survey regarding the topic “Whose Fault is that Bad Board?” After some thought, I submitted my answers. After all, I must have some kind of input after over 25 years of PCB design. But still, whose fault is that bad board?
Most of a PCB designer’s job involves placing parts and routing traces on a CAD tool, and then whipping out a set of drawings and Gerber files to send to the fab shop. Some of you even draw the schematics and maybe even do some library work now and then. For me, I’ve done all of that and more over the course of my career. That doesn’t make me a great designer; it just says I’ve done a lot of different things, as I’m sure many of you have too. So when it comes to problems with PCBs, just who is really at fault, and what do you do about it when you have issues, big or small?
As designers, we are typically detail-oriented and most likely perfectionists when it comes to our design work. I’ll admit it: I could clean up routing for days, but I limit myself to an hour or so per layer, as hard as that is for me sometimes. Unless it’s in-our-face obvious, when we try to decipher what happened when we have issues with a board, we tend to look someplace else.
OK, I know what you’re thinking: Don’t go there. We designers make mistakes too. Some of the things I’ve learned along the way came from making mistakes, and as we all know, that’s how you learn. As an example, and I have lots to choose from, once in my early days of design, the drawing checker asked if I could remove the leading zeros from dimensions under one inch. I thought about it. I really didn’t want to do this, because the zeroes are interactive with things on the board. His reply was that if I could possibly do so, then take the leading zeroes off any dimensions under one inch.
Against my better judgement, I did it anyway, and not more than a couple of weeks later, I get a call from the fab shop. It seems they started routing into one of the boards in a six-up panel. After I did a little investigating, I remembered that I changed the frame outline a bit and, you guessed it, the dimension didn’t update. Once I got the panel from the shop, I proudly took it up to the checker and exclaimed, “See, this is what happens when you override a dimension!” His answer was, “I just said to remove them if you could, not that you had to.” So, whose fault was that? His for requesting that I remove them, mine for doing it when I knew I shouldn’t, or me for not remembering I did it or maybe not providing a compelling reason not to? After that, I had a good reason for leaving the leading zeroes alone, no matter what the dimensions are. Lesson learned.
To read this entire article, which appeared in the August 2017 issue of The PCB Design Magazine, click here.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
On the Line With... Podcast Talks With Cadence Expert on Manufacturing
04/18/2024 | I-Connect007In “PCB 3.0: A New Design Methodology: Manufacturing” Patrick Davis returns to the podcast to talk about design rules. As design considerations become more and more complex, so, too, do the rulesets designers must abide by.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.