NPL and SMART Group to Hold Design, Process & Reliability Seminar


Reading time ( words)

The National Physical Laboratory and SMART Group will hold a seminar November 9, 2017, that will showcase the latest research and results from NPL projects looking at solder joint and contamination failure, coating thickness measurement, solder joint reliability, and high temperature reliability for alternative solders and substrates materials.

Presentations include performance and lifetime of printed semiconductors, high-temperature electronics and their reliability, coatings for high temperature applications, and factors affecting moisture diffusion in PCBs.

The event will be held at the National Physical Laboratory in Hampton Road, Teddington in London.

To register, click here.

Share

Print


Suggested Items

Solder Mask Tack Dry

11/08/2019 | Nikolaus Schubkegel
As a general rule, the tack-dry temperature should be as low as possible; in other words, it should only be as high as necessary. If the temperature is too low, the evaporation rate for the solvent will be to slow, and the solder mask will not dry in a reasonable amount of time. If the temperature is too high, however, the dry time certainly will be excellent, but it could create a solder mask lock-in with repercussions by the developing time.

Institute of Circuit Technology Harrogate Christmas Seminar 2018

01/02/2019 | Pete Starkey, I-Connect007
The Institute of Circuit Technology returned to the fading Victorian splendour of the palatial and stately Majestic Hotel in the North Yorkshire town of Harrogate for its 2018 Christmas seminar, an intense programme of five excellent technical presentations, impeccably organised and moderated by Technical Director Bill Wilkie and generously supported by GSPK Circuits.

RTW IPC APEX EXPO: Rogers' High-Frequency/High-Temp Substrates

03/26/2018 | Real Time with...IPC
Tony Mattingly, senior product manager at Rogers Corporation, discusses the company's new substrates for high-frequency/high-temperature applications.



Copyright © 2020 I-Connect007. All rights reserved.