-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Estimated reading time: 1 minute
The Plating Forum: New Developments in ENIG
Electroless nickel immersion gold (ENIG) has been around the printed circuit industry for more than 25 years. The first version of the IPC-4552 ENIG specification was issued in 2002. Initially, the specification only addressed tin/lead solder; now, lead-free solder, like SAC 305 and its variants, dominate soldering in electronics. Although the occurrence of corrosion was recognized, a better understanding of the defect has led to a series of improvements over time.
Today, it is well established that Ni corrosion occurs in the immersion gold step, and the most important method for eliminating the defect is through process control. ENIG is a complex chemical process with multiple process steps, and each step must be completed successfully before proceeding forward. ENIG remains a very popular surface finish and offers a series of benefits at assembly: it is easy to inspect, has an extended shelf life, and is suitable for a wide range of assembly applications.
The IPC-4552 Rev A, issued in 2017, specifies the deposit thickness: nickel from 3–6 µm (120–240 µnis) and gold from 0.04–0.1 µm (1.6–4.0 µins). The upper limit for gold at 0.1 µm (4.0 µins) would require an extended dwell time in the immersion gold bath. The extended dwell time makes the deposit susceptible to nickel corrosion. The recommended immersion gold deposit thickness is 0.04–0.07 µm (1.6–2.8 µins). If a higher gold thickness is a design requirement, an alternative to immersion gold should be used for deposition. Two available alternatives are reduction-assisted immersion (RAI) gold and electroless gold.
To read this entire column, which appeared in the December 2019 issue of PCB007 Magazine, click here.
More Columns from The Plating Forum
The Plating Forum: Reduction Assisted Immersion Gold for ENEPIG Surface FinishThe Plating Forum: Surface Finish Evolution from Conventional to Advanced
The Plating Forum: Plating in Electronic Applications
The Plating Forum: How the Pandemic Impacted PCB Manufacturing
The Plating Forum: The Significance of IPC ENIG Specification 4552 Revision B
The Plating Forum: The IPC Surface Finish Specifications
The Plating Forum: An Overview of Surface Finishes
The Plating Forum: DIG—The Next Generation