-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
LPKF on Stencils and Depaneling
February 11, 2020 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
Stephan Schmidt and Mirela Orlowski of LPKF Laser & Electronics North America discuss laser technology in cutting stencils and depaneling circuit boards as a factor in shrinking component sizes and why few people in the industry realize how much of an impact the stencil can have on the manufacturing line.
Nolan Johnson: There’s a lot happening right now with smaller components, smaller step sizes between pads, smaller features on the boards, tight tolerances, as well as interfacing between the component and the board with the solder paste. What’s your perspective on the challenges as an equipment manufacturer?
Stephan Schmidt: We have an impact on two sides of the assembly world. One side is the equipment for the depaneling of PCBs because this product is at the forefront of high miniaturization. It’s used for challenging components and circuit boards that can’t be done with the traditional technologies, such as routers and pizza cutters or manual depaneling situations. If you have small components that need high tolerances, that is not possible anymore with traditional mechanical separation methods.
We also have some impact on the stencil manufacturing side, where we manufacture laser systems to cut SMT solder paste stencils. The importance of the quality of those stencils is higher now than it ever was in the past. With the tolerances in PCBs being what they are, it can only be reasonably affected by the buyer of the circuit board, and it is important that the quality of the stencil not add any negative impact.
Especially with SMT components getting smaller and smaller, we need to get the solder paste in the right spot to avoid any shorts or bridges. Having an accurate stencil goes a long way. Some manufacturers that we’ve worked with in the past have looked into this carefully and understood how important the role a relatively inexpensive item, such as a regular solder paste stencil, has in their manufacturing yield.
Once they looked into this and understood how important those things were, they decided that only stencils with a certain quality can be used, and it made a big difference in the manufacturing process. They recognize that buying a stencil that’s made on a high-quality machine versus one that is 20 years old and out of calibration makes a huge difference for them. It doesn’t come down to saving $10 on the cost of the stencil; it’s about saving thousands of dollars in the manufacturing process by buying a quality tool that is reliable for manufacturing.
To read this entire interview, which appeared in the February 2020 issue of SMT007 Magazine, click here.
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.