-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC Designers Council Has a New Name: IPC Design
February 11, 2020 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
Yes, you read that right. The IPC Designers Council is now known as IPC Design. Many of you have heard secondhand stories about what this change will entail, so I asked IPC to shed some light on this subject. I recently spoke with IPC’s Teresa Rowe and Patrick Crawford about what’s changing, what’s not, and IPC’s plans to provide improved infrastructure for PCB design content and curriculum.
Andy Shaughnessy: Teresa, why and how is the IPC Designers Council (DC) changing?
Teresa Rowe: It has been about 15 years since IPC took a look at the design community at large. During that time, a lot has changed in the industry. It was time to look at where our pockets of designers were and how IPC’s design products were being used in the industry and addressing the design programs, overall. It is changing in a way that will address the community at large.
Shaughnessy: And what will the new program name be?
Patrick Crawford: It will be called IPC Design. We’re going to be mixing the power of IPC and the design community.
Rowe: It embraces standards development, education, the foundation piece of it, designer community leadership, etc. It brings the design community together in one place to move forward.
Crawford: The core of the new program will be to empower and benefit more PCB designers, as I think it always has been. We want to bring more of IPC’s resources to bear on the design community in the sense that we have a vast member network and a vast digital infrastructure that can track committees, create groups, and allow them to disseminate knowledge online. We have a large body of expertise in our IPC education and certification department. The point is that we have many parts of IPC that could be better channeled into the design community.
Looking at this, we love the idea of having these regional groups as the IPC DC—a forum by which designers can communicate and disseminate knowledge. What we want to do is take that idea and build a stronger scaffold around it so it can be better supported by IPC. And to answer how the IPC DC infrastructure will change, it won’t really. We’re going to call them Design Chapters to better align with the nomenclature of IPC, but they are still going to have the same executive structure within those smaller groups, such as president, vice president, etc.
To read this entire interview, which appeared in the January 2020 issue of Design007 Magazine, click here.
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.