The Qualities of Great Bosses


Reading time ( words)

One Friday morning, coffee in hand, I read an article on LinkedIn by Jeff Haden, titled 8 Qualities that Make Great Bosses Unforgettable.

I didn’t think much of it until the end of the day when I had a moment to appreciate how amazing my boss really is. Haden is so right.

Read the article and consider your own company. Does your boss fit this description of a great boss? My boss certainly does. Based on Haden’s article, the following is a tribute to my boss, Steve Klare.

1. They believe the unbelievable.

In 1983, Steve founded Intercept Technology. He was employed at Lockheed-Martin at the time, and saw that his department was either going to relocate him or lay him off. Rather than move his young family, who had just settled into their newly-built home in an Atlanta suburb, he decided to put his skills to use as an electrical engineer. He began working contracts privately, and slowly but surely built a business that became an EDA software vendor. The growth was unbelievable. Years of stability have followed, and I have been part of it.

2. They see opportunity in instability and uncertainty.

In 2001, while we were at PCB East in Worcester, Massachusetts, I watched the twin towers fall. My boss, a colleague, and I rented a car and drove in shifts all the way back to Atlanta without stopping. We had no idea what to think. But Steve predicted that military contracts were going to heat up, and that we were going to forge ahead with new products. He hung an American flag at the front door of our office and told us the best thing we could do was get to work. So we did, with pride in our hearts and renewed energy.

Read the full column here.


Editor's Note: This column originally appeared in the November 2014 issue of The PCB Design Magazine.

Share

Print


Suggested Items

Designing for Complex PCBs

12/12/2019 | I-Connect007 Editorial Team
The I-Connect007 editorial team sat down with Freedom CAD’s Scott Miller to talk about the industry’s demand for more increasingly complex PCBs, and the challenges this presents. They also discuss Freedom CAD’s in-house training programs, the company’s recent book authored by Scott, and why communication is such an important tool in a PCB designer’s toolbox.

IPC Reliability Forum Wrap-up With Brook Sandy-Smith

08/12/2019 | Andy Shaughnessy, Design007 Magazine
I attended the recent IPC High-Reliability Forum and Microvia Summit in Baltimore, Maryland. The speakers and panelists focused on a variety of topics, but one issue that kept popping up was the failure of some microvias on military and aerospace PCBs. Fortunately, some smart technologists are focusing on determining the cause of these via failures. I asked Brook Sandy-Smith, IPC’s technical education program manager, to give us a quick wrap-up of this event.

Denny Fritz: The Difference Between Quality and Reliability

08/06/2019 | Andy Shaughnessy, Design007 Magazine
I recently spoke with industry veteran (and I-Connect007 columnist) Denny Fritz about the relationship between quality and reliability—two terms that are unequal but often used interchangeably. We also discuss the current state of lead-free solders in the U.S. military and defense market as well as the microvia reliability issues Denny focused on at IPC’s High-Reliability Forum and Microvia Summit in Baltimore, Maryland.



Copyright © 2019 I-Connect007. All rights reserved.