Impedance Control, Revisited


Reading time ( words)

Surprising me on a regular basis is the way that demand for impedance control continues to extend into a broader range of product. After some 20 years of involvement in this field, I would have expected that everyone who needed to consider impedance control would have the capability nailed. Fortunately, that’s not the case, and a steady stream of “how to” questions keep coming my way.

The positives for new fabricators and designers lie in the fact that, even though impedance control may be new to them, there is a wealth of information available. Some of this information is common sense and some is a little counterintuitive. So, this month I’d like to go back to the fundamentals, and even if you are an experienced hand at the subject, it can be worth revisiting the basics from time to time.

Standards

It’s worth remembering that traceable reference impedance standards are available and all impedance measurement systems should be able to be compared to a traceable standard. The reference air line is the de facto standard for impedance—a precision manufactured coaxial standard “air” referring to the fact that air is employed as the dielectric in this type of precision reference line. 

To read this entire article, which appeared in the May 2015 issue of The PCB Design Magazine, click here.

Share

Print


Suggested Items

IPC-2581 Continues to Flourish

10/31/2019 | Linda Mazzitelli, PTC
Because standards adoption in this industry tends to be akin to turning around a battleship, what is often seen as new has generally already been in production for 10 years or more. Often, there are outside influences and dependencies that cause this, so most of us tend to take a “wait-and-see” approach—let others shake out the issues. And even then, we only look at adoption if the mandate comes from higher-ups in the organization. It works the way we do it now, so why change?

Martyn Gaudion on Signal Integrity Modelling and Stackup Tools

12/11/2018 | Pete Starkey, I-Connect007
The accuracy of signal integrity modelling continues to improve, and stackup tools are becoming widely used, which now include material suppliers' datasheet information. During the recent electronica show in Munich, Germany, Martyn Gaudion, managing director at Polar Instruments, explained how Polar often serves as a bridge between PCB design and fabrication, and why educating his customers is so critical.

Show & Tell: IPC APEX EXPO 2018 is on the Books!

05/14/2018 | Happy Holden
I-Connect007's Happy Holden reviewed the recently concluded IPC APEX EXPO 2018. Among the highlights: Less than 10% of all new orders arrive at the PCB fabricator’s facility with complete, accurate design data. Most have missing or incorrect data.



Copyright © 2019 I-Connect007. All rights reserved.