MAPI Economic Forecast: Oil, Gas, Dollar, Consumers All Factors
June 12, 2015 | MAPI FoundationEstimated reading time: 2 minutes
A confluence of factors, including falling oil and natural gas prices, dollar appreciation, and consumers pulling back spending, has tempered the U.S. economic outlook for 2015, according to a new forecast.
The MAPI Foundation, the research affiliate of the Manufacturers Alliance for Productivity and Innovation, released its quarterly economic forecast, predicting that inflation-adjusted gross domestic product will expand 2.4% in 2015, down from 3.0% in the February 2015 report, before rebounding to 3.0% in 2016, an increase from 2.7% in the previous forecast.
Manufacturing production is expected to outpace GDP but only slightly, with anticipated growth of 2.5% in 2015 (a decrease from 3.7% in the previous forecast) and 4.0% in 2016 (an upswing from 3.6% in the February report).
"Consumers seemed to have spent their fuel savings from the drop in oil prices in the fourth quarter of 2014," said MAPI Foundation Chief Economist Daniel J. Meckstroth, Ph.D. "We expected some residual strength that does not seem to be there, and there is no indication we will see a surge in consumer spending. People are paying down debt and saving more rather than spending.
"In addition, the dollar appreciated by 20% in a short period of time, making imports cheaper and exports more expensive," he added. "Businesses have been cutting prices to keep market share up for foreign customers, hurting profits and investments. And with oil prices dropping by 50% in the fourth quarter, drilling activity has plummeted, affecting jobs and the energy supply chain."
Production in non-high-tech manufacturing is expected to increase 2.4% in 2015, 3.2% in 2016, and 2.9% in 2017. High-tech manufacturing production, which accounts for approximately 5% of all manufacturing, is anticipated to grow 4.7% in 2015, 9.1% in 2016, and 8.3% in 2017.
The forecast for inflation-adjusted investment in equipment is for growth of 6.1% in 2015, 9.6% in 2016, and 6.1% in 2017. Capital equipment spending in high-tech sectors will also rise. Inflation-adjusted expenditures for information processing equipment are anticipated to increase by 7.7% in 2015, a robust 13.0% in 2016, and 8.3% in 2017. The MAPI Foundation expects industrial equipment expenditures to advance 5.2% in 2015, 13.1% in 2016, and 8.5% in 2017. Spending on transportation equipment is forecast to increase 7.3% in 2015 and 0.8% in 2016 but remain flat in 2017.
Spending on nonresidential structures is anticipated to decrease by 6.6% in 2015 before rebounding to growth of 3.9% in 2016 and 7.9% in 2017. Residential fixed investment is forecast to increase 7.4% in 2015, 12.7% in 2016, and 9.2% in 2017. Meckstroth anticipates nearly 1.1 million housing starts in 2015, 1.3 million in 2016, and 1.5 million in 2017.
A strong dollar continues to be a challenge; Meckstroth expects trade will be a net drag on the U.S. economy over the next few years. Inflation-adjusted exports are anticipated to increase only 1.5% in 2015, 4.5% in 2016, and 4.3% in 2017. Meanwhile, imports are expected to grow 5.5% in 2015, 8.1% in 2016, and 6.0% in 2017. The MAPI Foundation forecasts overall unemployment to average 5.4% in 2015, 5.0% in 2016, and 4.9% in 2017.
The manufacturing sector added 210,000 jobs in 2014. The outlook is for an increase of 180,000 jobs in 2015, a drop from 282,000 anticipated in the February report. Meckstroth envisions only 33,000 manufacturing jobs to be added in 2016, a significant decrease from 162,000 in the previous forecast. He anticipates modest growth of 30,000 jobs in 2017.
The refiners’ acquisition cost per barrel of imported crude oil is expected to average $53.80 in 2015, $61.70 in 2016, and $67.50 in 2017.
Suggested Items
The Pulse: Drilling Down on Documentation
04/18/2024 | Martyn Gaudion -- Column: The PulseHow did a product aimed at signal integrity end up being more about documentation? For a little backstory, the Polar team has an unspoken “no business speak” rule at certain times. So, why is this column titled “Drilling Down?” I find it fascinating when a company sets off in one direction, but customers steer it in another. That’s what has happened here as customers took a product down a fork in the road we couldn’t predict. Your destination isn’t always where you initially set off to go, and that’s how we got to our subject of drills and drill documentation.
MKS Introduces ESI Geode G2 CO2 Laser System for High- Precision and High-Speed HDI and mSap Via Drilling
04/09/2024 | MKS Instruments, Inc.MKS Instruments, Inc., a global provider of technologies that transform our world, today announced the official launch of the ESI Geode™ G2 laser drill system, the next generation of the Geode™ platform for processing PCB and ICP materials.
MKS Instruments Receives 2023 Outstanding Service Award from MFLEX
02/29/2024 | MKS Instruments, Inc.MKS Instruments, Inc., a global provider of technologies that transform our world, recently received the 2023 Outstanding Service Award from MFLEX, a global leader in flexible printed circuit board manufacturing and assembly. The award recognizes MKS for outstanding customer support and system service in high-production manufacturing environments.
Schmoll: Pushing Drilling Forward
10/03/2023 | Nolan Johnson, PCB007 MagazineAutomation is everywhere, and nowhere is that more evident than the machines from Schmoll used in the new captive facility for Schweitzer Engineering Laboratories. Schmoll Maschinen GmbH Executive Director Stephan Kunz, and Evan Howard, service manager for Schmoll products, Burkle North America, discuss how their machines are perfectly suited for SEL’s production lines.
STARTEAM GLOBAL Expands Global Footprint with New Smart Manufacturing Factory in Prachinburi, Thailand
09/15/2023 | STARTEAM GLOBALSTARTEAM GLOBAL, a leading manufacturer of Printed Circuit Boards (PCB), technology and service solutions, is pleased to announce the opening of our new PCB manufacturing factory in Prachinburi, Thailand, on Wednesday 27 September 2023.