-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Physics of Failure Durability Simulations for Automotive Electronics
September 30, 2015 | James G. McLeish and Tom O'Connor, DfR SolutionsEstimated reading time: 1 minute
Automotive electronics systems are becoming increasing complex and essential for the proper, safe operation of cars and trucks. Vehicle controls for basic operation and safety functions are increasingly being implemented by electronic modules. The ability of these electronic systems to function reliably is becoming a greater aspect of vehicle safety as was dramatically demonstrated by the 2009–2011 recall of over 9 million Toyota vehicles for unintended acceleration issues.
After the Toyota incident, the U.S. National Academy of Science issued “Special Report #038: The Safety Challenge and Promise of Automotive Electronics—Insights from Unintended Acceleration” in January 2012. The report cited that federal safety regulators in the National Highway Traffic Safety Administration (NHTSA) lack the expertise to monitor vehicles with increasingly sophisticated electronics, as was demonstrated by the need for NHSTA to call in NASA electronic personnel to assist in the investigation.
But 2014 was an even worse year for the auto industry, plagued with a record 700 recalls of over 60 million vehicles that has cost billions of dollars, involved numerous NHTSA safety investigations, record federal fines, damning publicity, unsettled legal liabilities, and congressional investigations. Severe new vehicle safety legislation is now under consideration. With many of these reliability issues, the vehicles’ systems functioned for years before failures with safety consequences occurred. Others involved situations where product teams, executives and regulators did not recognize the safety consequences of product and system quality, reliability and durability (QRD) capabilities, especially when new technology is involved. The industry now searches for ways to ensure that this never occurs again.
While electronic reliability issues were widely suspected, but eventually ruled out as a root cause, the crisis revealed the challenges of evaluating, validating and investigating the reliability and safety assurance aspect of modern, distributed and interactive vehicle controls systems that are equally taxing on OEMs, electronic system suppliers and regulators.
Meanwhile, in Europe, the new standard ISO 26262, "Road Vehicles—Functional Safety," defines an automotive-specific approach for determining risk classes and requirements for validation and confirmation measures to ensure a sufficient and acceptable level of safety and reliability is being achieved.
To read this entire article, which appeared in the September issue of The PCB Design Magazine, click here.
Suggested Items
Camtek Receives Approx. $25M from tier-1 manufacturer for High Bandwidth Memory (HBM)
03/29/2024 | CamtekCamtek Ltd. announced that it has received a new order for approximately $25 million from a tier-1 HBM manufacturer, for the inspection and metrology of High Bandwidth Memory (HBM). Most of the systems are expected to be delivered in the second half of 2024.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
CentraTEQ to Showcase Wide Range of Vibration & Environmental Test Systems at Battery Tech Expo 24
03/26/2024 | CentraTEQEnvironmental and vibration test specialists CentraTEQ are excited to be exhibiting at the upcoming Battery Tech Expo, scheduled to take place at Silverstone on April 25, 2024.
SEMI 3D & Systems Summit To Spotlight Trends In Hybrid Bonding, Chiplet Design And Environmental Sustainability
03/26/2024 | SEMILeading experts in 3D integration and systems for semiconductor manufacturing applications will gather at the annual SEMI 3D & Systems Summit, 12-14 June, 2024,
iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs
03/25/2024 | IPCToday’s system solutions combine more varied functionality, such as digital, analog, optical, micro-mechanical, etc., packed into smaller form factors. As a result, electronics manufacturing has to deliver increasingly complex integration of diverse technologies with system designs that blur the distinction between chip, package, board, and assembly.