ICD Adds Matched Delay Optimization to Stackup Planner


Reading time ( words)

In-Circuit Design Pty Ltd (ICD), Australia, developer of the ICD Stackup and PDN Planner software, has released a Matched Delay Optimization feature for the Stackup Planner. 

Signals propagate at the speed-of-light in free space. However, this speed varies dramatically depending on the surrounding dielectric materials. Each layer, of a multilayer PCB, can have a very different propagation speed. This is particularly important for the latest high-speed DDR3/4 memory devices. The new “Matched Delay Optimization” feature, of the ICD Stackup Planner, allows you to not only match the length of busses, but takes this one step further by automatically calculating the appropriate length required to match the delay exactly. The integrated field solver simulates the flight time, of each signal layer, to quickly give you the results you need to effectively route memory.

ICD.jpg 

“A matched length of 2.3 inches for a DDR3/4 Data lane can produce up to 70ps delta, between signal layers, leaving the timing way outside the required DDR3/4 setup and hold times,” said Barry Olney, CEO. “Designers need to pay strict attention to the signal propagation, on each layer, ensuring the total flight time of the critical signals match, regardless of length. The ICD Stackup Planner now allows you to optimize this delay."

The relative signal propagation is displayed as a bar graph, once the matched length has been set. Selecting “Matched Delay” automatically optimizes the length, of each signal layer, to match the maximum delay. The user can then route the data lane, to the exact delay, in their preferred design tool.

About In-Circuit Design Pty Ltd

In-Circuit Design Pty Ltd, based in Australia, developer of the ICD Stackup and PDN Planner software, is a PCB Design Service Bureau and specialist in board level simulation. Visit www.icd.com.au.

Share

Print


Suggested Items

Just Ask Heidi Barnes: The Exclusive Compilation

01/15/2021 | I-Connect007 Editorial Team
We asked for your questions for Keysight Technologies' Heidi Barnes, and you took us up on it! We know you all enjoyed reading these questions and answers, so we’ve compiled all of them into one article for easy reference. We hope you enjoy having another bite at the apple.

TTM’s Approach to Stackup Design: Train the Customer

01/12/2021 | I-Connect007 Editorial Team
In this interview with the I-Connect007 Editorial Team, TTM’s Julie Ellis and Richard Dang drill down into stackup design, detailing some of the common stackup challenges that their customers face when designing for both prototype and volume levels, and offering advice to designers or engineers who are struggling with stackup issues. They also discuss why having too many different prepregs in a stackup can be asking for trouble, and how proper stackup design can optimize both the fabrication and assembly processes.

Cutting Respins: Journey to the Single-spin PCB

01/07/2021 | Chris Young, The Goebel Company
PCB design is more than a short sprint to the finish line; it is a journey best suited for the prepared adventurer. According to a study by Lifecycle Insights, the average PCB design project requires 2.9 respins. These respins can cost anywhere from tens of thousands to millions of dollars—each! As an engineer/business owner, I find respins frustrating because I would rather spend my time and money applying scientific principles inventing, improving technology, and solving problems. I am not an advocate for perfectionism, but rather I focus on becoming a better adventurer. Sometimes I get to taste the sweet wine that is a single spin PCB. As fellow adventurers, let’s discuss some topics that influence unnecessary return trips on our PCB design journey: simulation, technical reviews, and interest in PCB design.



Copyright © 2021 I-Connect007. All rights reserved.