Elementary, Mr. Watson: Location, Location, Location

“Location, location, location” is the mantra of any good real estate agent. The belief is that a home’s value fluctuates and is directly connected to its location. Anyone who has been home buying knows it’s not mainly the home itself but preferably what surrounds it that determines the real worth, such as the neighborhood, the types of schools, or whether or not your neighbor likes to practice drums at 3:00 a.m. every day in their garage.

When it comes to PCB design, one of the most overlooked principles is component placement. Similar to a home, the component location has a considerable impact on the quality, and I would describe it as the real value of a PCB design.

Nothing else is more vital to your designs’ overall value, while impacting so many different areas, than component placement. Some would argue that the more tedious and essential process is the routing, but I would point out that the component placement determines the routing. I would go as far as to say that the routing begins with your component placement because a great PCB designer can visualize the routing paths while placing the components. Many PCB designers’ passion for their craft is how they look at a layout; it’s one giant puzzle for most. With each component that they place on the PCB, the ability to visualize the puzzle’s solution is a real talent.

Furthermore, the component placement directly impacts the PCB manufacturing cost. With electronic devices getting smaller, a significant challenge is to first place more into the smaller area, which comes with its inherent heat dissipation and many other problems. Secondly, what seems to be the ever-changing design for manufacturing (DFM) guidelines such as component solderability, all of it directly relates and starts with component placement.

With that in mind, let’s look at five rules to follow when it comes to component placement. Of course, this shortlist is not comprehensive, but it is a good start.

General Component Placement Rules

1. First Things First
When beginning your component placement, it is essential to start with the critical components first, then large components, and finally, supporting discretes. A critical component is any component that impacts the overall unit form, fit, or function. These can range from board-to-board connectors and any components that require user access to the “outside” world. The mechanical function of your product entirely depends on your critical component placement.

Once that is done, a common practice is to lock their positions down. Next on your list is the larger components with their supporting discretes.

2. Grid, Grid, Grid
One of the standard rules throughout your PCB design is the importance of grids, including keeping certain items on the grids starts with the schematic symbol when placing the pins on the grid and keeping the schematic symbol on the grid.

On the PCB, when placing the components, it is all about the grid. For the large component mentioned in Rule 1, you should use a 50- or 100-mil grid (1.25–2.5 mm). For the supporting discretes, SMT resistors/capacitors, or other small passive components, a grid of 25 mils (0.625 mm) will do just fine. With some of the even smaller discrete components now used in the high-density layouts, you may require a smaller grid.

3. Edge Clearance
Keep your components at least 100 mils (2.5 mm) away from the edge of the PCB. There are a couple of reasons for this. Primarily, with the PCB edge V-scoring, the cutter bit is a 30° slice into the PCB at least one-third depth on each side, leaving only the inner one-third called the web. The board edge clearance is required not to hit any components, which would cause considerable damage to both the board and the V-score bit.

You also want to keep that component clearance from the PCB edge when the V-score is either cut or snapped. That is a highly stressed area. If you are snapping the V-score, the components close to the edge will stress the components, solder pads, and joints. These are the sort of problems that occur in a design that may not show up at first. But after being in the real world environment with conditions, power cycling, and thermal conditions. Those problems started with merely placing a component to close to the edge of the board. When they raise their ugly head, you need to make a field service visit. That is not a good image you want to make to your customer.

4. Circuit Isolation
An important rule in PCB design is to know your circuit and divide it into its operational sections, such as the analog, digital, and power supply areas. When designing the circuit, a good electronic engineer will have the analog and the digital circuitry isolated with its power and ground requirements. Also, use circuit isolation components. That is a subject of its own, especially when discussing the grounding (return paths) for the isolated circuits.

But with your placement, identify and keep isolated the analog, digital, and power components, ensuring that these separate areas do not cross-over each other and have their individual places to operate on your PCB. The reason being that each of these circuit types has its unique and specific noise and EMC problems that have a significant impact on the other circuits.

5. Components on a Single Side
Try to place all components on the top side only. IPC Standard IPC-2222 (1.6) describes the two assembly types of boards as being Type 1 as being the assembly with components on a single side and Type 2 as an assembly with components on both sides of the board. These are broken down even further into classes of the types of components used (SMT/TH). The reason for such detail in the types and classes is the necessary assembly processes needed on a PCB. It’s essential to understand those various assembly processes and how it impacts the design for assembly (DFA).

If not possible to keep all the components on a single layer, then only place the low-profile, small-size, and low thermal dissipation component (like SMD passive parts) on the bottom side.

Finally, having through-hole components placed on both sides of the PCB is not recommended. That is a complicated and expensive assembly process. But I am sure some assembly houses would take up such a complicated process for the right price.

The author Napoleon Hill once said, “Plan your work and work your plan.” That could not be more true than when walking through the various issues of a PCB design, especially when speaking of your component placement. Know your plan to correctly place the design components and never be in a guessing game; in the end, this will ensure you the best finished product.

John Watson, CID, is a customer success manager at Altium.



Elementary, Mr. Watson: Location, Location, Location


When it comes to PCB design, one of the most overlooked principles is component placement. Similar to a home, the component location has a considerable impact on the quality and is the real value of a PCB design. John Watson examines five rules to follow when it comes to component placement.

View Story

Elementary, Mr. Watson: Overcoming PCB Designs Pitfalls


When starting every PCB design, the hope is that we can navigate through any pitfalls that arrive. Unfortunately, many times, issues happen that you do not handle correctly; they fall through the cracks and end up in your PCB design. John Watson explains how that is when the real problems begin.

View Story

Elementary, Mr. Watson: How to Ruin Your PCB Design in 4 Easy Steps


John Watson has seen firsthand how quickly PCB designs can “go off the rails” by not following a few simple principles. In this column, he looks at four practices that can easily ruin your PCB design.

View Story

Elementary, Mr. Watson: PCB Components Naming Conventions


How you accurately analyze and identify certain information has a direct connection to the overall success of your PCB designs. In this column, John Watson focuses on the conventional naming scheme for the schematic symbol and footprint to prevent headaches and ulcers later.

View Story

Elementary, Mr. Watson: Collaboration in the PCB Design Process


The past few months have been trying for everyone, with many of us working from home. However, there are still the underlining principles of collaboration to step into a role to finish the necessary tasks to keep a project moving forward. John Watson, CID, explains.

View Story

Elementary, Mr. Watson: Reinventing Yourself


When COVID-19 first hit, many businesses were forced to close, and we immediately saw its impact on the service industry. Whatever challenge you’re facing, John Watson emphasizes that it’s time to hit the switch on reinventing.

View Story

Elementary, Mr. Watson: The Positive Side of COVID-19


With the recent COVID-19 outbreak worldwide, most of us have been forced to reshuffle how we work, live, and play. Something like this has never happened before in our lifetimes, and it is scary and challenging, but difficult times develop resilient people. John Watson shares some of the positive things he has already noticed come out of this situation.

View Story

Elementary, Mr. Watson: Are We There Yet?


Anyone who has taken a road trip with children knows the question, “Are we there yet?” very well. This question also applies to PCB design. If you are not careful, your PCB project could easily go off track and you could lose sight of what you are doing (objective), why (motivation), how (process), and when (schedule). John Watson emphasizes the importance of these fundamental questions.

View Story

Elementary, Mr. Watson: Eating the Elephants of Your PCB Design


After being in the PCB industry for 20 years, John Watson, CID, has had the opportunity to work with some of the best PCB designers and engineers in the field. He shares some of the traits PCB designers need, and how you can implement them into your design process to become a great designer.

View Story

Elementary, Mr. Watson: Rebuilding Trust When Things Go Wrong


When you look at the long list of steps involved in designing a PCB, it can be somewhat overwhelming and sometimes pretty easy to miss something. Be assured when things go wrong, they go very wrong. In his debut column, John Watson shares some tips for rebuilding trust when things go wrong.

View Story
Copyright © 2020 I-Connect007. All rights reserved.