Arlon’s 85HP Receives Official IPC Validation to IPC-4101E-WAM1/43
May 24, 2021 | Arlon Electronic MaterialsEstimated reading time: 1 minute
Arlon Electronic Materials is pleased to announce that IPC Validation Services officially recognizes Arlon’s 85HP laminate as having passed all tests that meets or exceeds the product performance requirements of IPC-4101E-WAM1/43. By achieving validation to slash sheet 43, Arlon’s 85HP is distinguished as the most thermally stable, pure polyimide resin system on the market. Specifically, 85HP meets the test criteria for less than 1% coefficient of thermal expansion in the Z axis between 50o to 260o C. In “Time to Delamination” tests at 300o C, 85HP withstood thermal exposure for longer than 60 minutes, far exceeding the slash 43 requirement of 5 minutes. Furthermore, 85HP moisture absorption of 0.19% is well below the slash 43 criteria of 0.5% maximum. CTE (x-y plane) of the 85HP is 17 ppm matching the CTE of copper. In addition to these slash 43 requirements, 85HP has a thermal conductivity of 0.50 W/mK, which is two times (2X) greater than other pure polyimide CCL materials.
These unique attributes are why 85HP is the first polyimide product to be validated to three IPC-4101 slash sheets 40, 41 and 43.
Test results for 85HP’s Validation can be found on the IPC Validation Services website.
Applications for Arlon’s 85HP include high layer count MLB’s incorporating multiple sequential lamination operations, thick copper MLB’s, high power copper internal planes, deep space electronics, down-hole oil and gas drill equipment, engine control modules, rocket motor controls, and avionic electronics.
For additional information, please visit our website at www.arlonemd.com.
Related Article:
Suggested Items
KYZEN’s Adam Klett to Keynote at SMTA Electronics in Harsh Environments Conference
05/07/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, announced today that KYZEN’s Director of Science, Adam Klett, PhD will present as a keynote speaker at the SMTA Electronics in Harsh Environments Conference. The event is scheduled to take place May 14-16, 2024 at the Technical University of Denmark in Copenhagen, Denmark.
Altus Equips SSTL with Advanced Cleaning Technology for Electronics
05/07/2024 | Altus GroupAltus Group, a leading supplier of capital equipment for the electronics manufacturing industry, has announced the successful installation of an advanced PCBA cleaning system at Surrey Satellite Technology Limited (SSTL).
GPV's Handover of Refurbished Factory Building
05/07/2024 | GPVOn 6 May 2024, Bjorn Fiskers, MD at GPV Electronics TH in Thailand and his team were handed the keys to our refurbished factory building, adding another 7,000 sqm to our current 15,000 sqm electronics factory. Our electronics factory in Thailand will comprise of a total of 22,000 sqm.
New Yorker, Major League Electronics Sign New Franchised Distribution Agreement
05/06/2024 | New Yorker Electronics Co.New Yorker Electronics, global distributor of electronic components, recently announced a new franchised distribution agreement with Major League Electronics, renowned manufacturer of interconnect products.
AT&S Brings High-Tech to the Museumsquartier
05/06/2024 | AT&SAT&S, as a “MQ goes Green” partner, has prepared special highlights for the occasion: Visitors aged eight and above can embark on an interactive journey through the fascinating world of microelectronics.