-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
DFM 101: PCB Via Structures
November 2, 2021 | Anaya Vardya, American Standard CircuitsEstimated reading time: 3 minutes
One of the biggest challenges facing PCB designers is not understanding the cost drivers in the PCB manufacturing process. This article is the latest in a series that will discuss these cost drivers (from the PCB manufacturer’s perspective) and the design decisions that will impact product reliability.
DFM
Design for manufacturing (DFM) is defined as the practice of designing printed circuit boards that meet not only the capabilities of the customer’s assembly manufacturing process, but also the capabilities of the board fabrication process at the lowest possible cost. While not a substitute for early design engagement with the PCB fabricator, these articles will provide guidelines that will help to “design for success.”
Microvias
One of the most important technological advancements that made HDI viable was development of the microvia: a very small hole (typically 0.006” or smaller) that only connects certain layers either as “blind” or “buried” via holes. This represents a totally new way of making electrical connections between layers on a PCB. Traditional PCB technology has utilized “through-holes,” which by definition, are drilled through the entire PCB connecting the two outside layers with all of the internal layers. The ability to strategically connect only certain pads on certain layers greatly reduces the real estate needed for a PCB design and allows a much greater density in a smaller footprint. Figure 1 shows through-holes and buried and blind vias.
Figure 1: Microvias vs. through-hole vias. (Image credit: NCAB Group)
Types of Microvias
- Blind via: Used to connect one surface layer with at least one internal layer
- Buried via: Used to create connections of internal layers with no contact to the surface layers
- Via-in-pad: A type of blind via in which the via hole is drilled in a surface mount pad, eliminating the need to run a trace and via pad from each SMT pad
- Filled vias: Completely filling the microvia with either a non-conductive or conductive paste. Conductive fill is typically used for heat dissipation and non-conductive fill is used to closely match the thermal expansion of the substrate.
Microvia Formation
Microvias can be formed through a number of methods, primarily mechanical drilling, laser drilling and sequential lamination.
- Mechanical drilling: Uses traditional drilling equipment to mechanically form holes, but typically limited to 0.006” diameter and dependent on the depth needed
- Laser drilling: Special drilling equipment that utilizes a laser to form the hole and can go down to 0.001” in diameter
- Sequential lamination: A process where the microvias are drilled all the way through a sub-panel of the layers that need to be connected by the via, which could require multiple lamination, plating, filling and planarization operations (Figure 2).
Figure 2: Sequential lamination. (Source: Siemens EDA)
Stacked vs. Staggered Microvias
- Stacked: Microvias that are electrically connected and literally stacked vertically on top of each other through various layers of the PCB
- Staggered: Microvias that are electrically connected and offset to one another through various layers of the PCB (Figure 3)
Figure 3: Staggered and stacked microvias.
Via-in-Pad Microvias
The via-in-pad production process allows you to place vias in the surface of the flat lands on your PCB by plating the via, filling it with one of the various fill types, capping it and, finally, plating over it. Via-in-pad is typically a 10- to 12-step process that requires specialized equipment and skilled technicians. Via-in-pad is often an optimum choice for HDI PCBs because it can simplify thermal management, reduce space requirements, and provide one of the shortest ways to bypass capacitors for high-frequency designs (Figure 4).
Figure 4: Via-in-pad.
Understanding the cost drivers in PCB fabrication and early engagement between the designer and the fabricator are crucial elements that lead to cost-effective design success. Following your fabricator’s DFM guidelines is the first place to start.
This article originally appeared in the October 2021 issue of Design007 Magazine.
Anaya Vardya is president and CEO of American Standard Circuits; co-author of The Printed Circuit Designer’s Guide to…?Fundamentals of RF/Microwave PCBs and?Flex and Rigid-Flex Fundamentals; and author of Thermal Management: A Fabricator's Perspective. Visit?I-007eBooks.com?to download these and other?free, educational titles. He also co-authored “Fundamentals of Printed Circuit Board Technologies,” and is an I-Connect007 columnist. To read past columns, or contact Vardya, click here.
Suggested Items
USPAE to Springboard U.S. Technology Forward
04/30/2024 | Marcy LaRont, PCB007 MagazineThe U.S. Partnership for Assured Electronics (USPAE) was launched as a nonprofit subsidiary of IPC in 2020, specifically to manage the DoD relationship and access to funding, and to develop a cooperative facility to develop UHDI capabilities in the U.S., not only for the defense sector, but for the whole of the U.S. electronics industry. It is a tall order, but industry veteran Joe O'Neil believes it will happen. Having been tasked with making the UHDI Capable Cooperative Production Facility (UCCPF) a reality, he provides an update on this important project for U.S. electronics manufacturing.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/05/2024 | Andy Shaughnessy, I-Connect007Spring has definitely sprung; it was 81 degrees last week in Atlanta, and this week it’s been in the 40s. That’s typical spring weather in Atlanta. My newly cut lawn is looking great, thanks to my “yard guy” Clive. I need to finish packing for IPC APEX EXPO, so without further ado, here’s my must-reads for this week. I hope to see you at APEX next week.
Creators of SMT UHDI Test Board Vehicle Discuss this Important Project
04/04/2024 | Nolan Johnson, I-Connect007Chrys Shea of Shea Engineering and Altium’s David Haboud educate us on the latest revision of the SMT test board for UHDI testing, presented at the SMTA UHDI Symposium on March 26 in Arizona. Chrys was involved in the original SMT test board, introduced roughly five years ago. She and David discuss recreating the test board to be appropriate for UHDI, the genesis and history of this project, and why industry members should make use of it to benchmark their processes.
Collaboration and Innovation: Insights from SMTA's First UHDI Symposium
04/02/2024 | Marcy LaRont, PCB007 MagazineAnaya Vardya provides valuable insights on industry collaboration and innovation at the first SMTA UHDI Symposium, delving into the necessity of collaboration in driving innovation and progress within our industry. He shares his experience in helping put this event together, and pride in being a part of bringing the UHDI test board to life.
SMTA Conducts First UHDI Symposium
03/29/2024 | Marcy LaRont, PCB007 MagazineSMTA’s first UHDI Symposium in Peoria, Arizona, on Tuesday, March 26 featured a standout full-day technical program with 11 separate presentations on what will be required for our companies to move to ultra HDI manufacturing. The event was the brainchild of Tara Dunn, SMTA director of training and education. It included a compelling and collaborative presentation by David Haboud of Altium, John Johnson of American Standards Circuits, and Chrys Shea of Shea Engineering, who had spent the past several weeks creating and building an appropriate SMT test board vehicle for UHDI, something that was passed around for all conference goers to see and touch.