VTT: Environmental Impact of Flexible Electronics Can be Reduced by Almost 90%
March 1, 2023 | VTT Technical Research Centre of FinlandEstimated reading time: 2 minutes
VTT Technical Research Centre of Finland announces the results of a study investigating how changing the manufacturing of electronics can improve their environmental impact. For example, one of the project’s most significant findings showed that environmental impact could be reduced by 86% when additive printing methods are used to create flexible electronic components, as reported in detail by LUT University.
The project showed several areas of electronics manufacturing where an impact on environmental footprint and sustainability is possible.
“Traditionally, metal electronics parts are etched out of copper sheets in a process called PCB etching. The process removes unwanted copper from a printed circuit board, so only the required circuit remains while the rest of the sheet isn’t used,” says Liisa Hakola, Senior Scientist and Senior Project Manager at VTT.
“We found that flexible metal electronics parts can instead be printed onto bio-based substrates, like paper or bio-plastic. The process requires less energy and avoids the use of harmful chemicals while drastically reducing material waste and increasing the use of renewable materials. This change in the manufacturing process is the single largest factor in potentially reducing the climate impact of flexible electronics.”
In printed electronics, there are additional challenges that still need to be resolved. Silver has a high environmental impact and is commonly used for printed electronics. The project found that silver can be replaced with more abundant and less valuable alternatives, such as copper or carbon-based materials. This provides further reduction to the environmental footprint of flexible electronics. In addition, end-of-life management and longevity of product usability, i.e., better durability and decreased energy consumption, are also key factors in creating more sustainable electronics.
The flexible electronics market is expected to grow to $45.88 billion by 2026. By 2030, global electronic waste will reach 74 billion kilograms, with only 20% collected or recycled properly. The electronics industry is currently facing major challenges with the availability of crucial materials combined with increasing pressure to cut its environmental footprint and move toward circularity.
In March 2022, the European Commission published its Sustainable Products Initiative, which aims to ensure that all products placed on the EU market become more sustainable. Thereby, the initiative also includes electronics, and so manufacturers are met with increasing pressure to meet new sustainability requirements in the years to come.
“At VTT, our goal is to set a new standard for sustainability in the electronics industry and offer solutions that increase circularity at every stage of the electronics life cycle,” says Maria Smolander, Research Team Leader at VTT. “Implementing these new manufacturing methods on a mass scale is a challenge that the industry will inevitably need to tackle in the coming decade in order to keep up with increasingly strict regulations and demands from consumers.”
This national ecosystem project was co-funded by Business Finland.
Suggested Items
SPEA Expands in Southeast Asia with New Subsidiary in Thailand
05/17/2024 | SPEASPEA, a global leader in automatic test equipment for the manufacturing of semiconductor, microelectronic and electronic devices, today announced the opening of its new subsidiary in Thailand. This expansion marks a significant step forward in SPEA's commitment to serving the growing Southeast Asian microchip and electronics market with leading-edge manufacturing machinery and equipment.
Indium Corporation to Showcase Sustainable Solutions for Power Electronics at PCIM
05/17/2024 | Indium CorporationAs one of the leading materials providers to the power electronics assembly industry, Indium Corporation® will proudly showcase a selection of innovative products at PCIM Europe, June 11-13, in Nuremberg, Germany.
Siemens, Foxconn Team Up to Optimize Forward-thinking Manufacturing
05/16/2024 | FoxconnSiemens AG, a leading technology company, and Hon Hai Technology Group (Foxconn), the world’s largest electronics manufacturer, have signed a memorandum of understanding (MoU) to drive digital transformation and sustainability in smart manufacturing platforms.
IPC Releases May 2024 Global Sentiment of the Electronics Supply Chain Report
05/16/2024 | IPCSentiment among electronics manufacturers fell this month, after hitting a new high in April. Despite the decline, sentiment remains historically high according to IPC’s May Sentiment of the Global Electronics Manufacturing Supply Chain Report.
Sypris Reports Q1 2024 Results; Revenue Up 10%
05/15/2024 | Sypris Solutions Inc.The Company’s first quarter 2024 consolidated revenue increased 10.1% to $35.6 million compared with the prior-year quarter, representing the 11th quarter of double-digit year-over-year growth during the past 12 quarterly periods.