Engineers Develop Tools to Share Power from Renewable Energy Sources During Outages
September 6, 2017 | UC San DiegoEstimated reading time: 3 minutes
If you think you can use the solar panels on your roof to power your home during an outage, think again. During an outage, while your home remains connected to the grid, the devices that manage your solar panels are powered down for safety reasons. In other words, this permanent connection to the grid makes it impossible for homeowners to draw on power generated by their own renewable energy resources.
A team of engineers at the University of California San Diego wants to change this. They have developed algorithms that would allow homes to use and share power from their renewable energy sources during outages by strategically disconnecting these devices, called solar inverters, from the grid. The algorithms work with existing technology and would improve systems’ reliability by 25 to 35 percent. Researchers detail the algorithms and their applications in a paper they presented at the American Control Conference in Seattle, Wash.
“We were inspired to start investigating a way to use renewable power during outages after Hurricane Sandy affected eight million people on the East Coast and left some without power for up to two weeks,” said Abdulelah H. Habib, a Ph.D. candidate in mechanical engineering at UC San Diego and the paper’s first author.
Just a few hours without power can cause massive losses to both product and revenue. Every year, 7 million customers experience power outages. Outages that last more than 5 to 10 minutes cost customers more than $80 billion each year.
How the algorithm works
The innovation here is the algorithm’s capability to prioritize distribution of power from renewable resources during an outage. The equations take into account forecasts for solar and wind power generation as well as how much energy storage is available, including electric vehicles, batteries and so on. The algorithm combines that information with the amount of energy that the residents are projected to use as well as the amount of energy that a cluster of homes can generate.
The algorithm could also be programmed to include a priority function, based on different parameters. For example, customers who are willing to pay more could get priority to get power during an outage. Or customers who generate more energy than they produce during normal operations would not lose power during an outage. More importantly, the algorithm could give priority to customers who are in urgent need of power, because they use life support equipment, for example.
Hardware and storage
Researchers investigated what energy storage configuration would work best with their algorithm. Although having energy storage systems in each home leads to optimal performance, most customers preferred to share a community-scale storage system, which dramatically cut down costs.
“Houses connected together are much more resilient during outages,” said Raymond de Callafon, a professor of mechanical engineering at the University of California San Diego, and one of the senior authors of the paper. “They’re also more resilient to price fluctuations. They can do a much better job at sharing resources and it benefits every house.”
The algorithms work with existing technology but they require each home to be equipped with circuit breakers that can be remotely controlled—and these devices are not yet widespread. Utilities also would have to install advanced communications methods that allow the power systems in a residential cluster to talk to one another.
In addition, all homes with solar panels are equipped with inverters, which turn the direct current power generated by the panels into alternating current that can circulate on the grid. These are so called “grid following” devices, because they can only connect to the grid. To bring together a cluster of homes, each house needs to be equipped with a “grid forming” inverter, which can connect to similar devices at other residences.
Next steps
Next steps include showing that the system is reliable in the lab, with software and hardware both in the loop.
Finally, regulations would have to change nationwide. In most states, individual home owners are not allowed to sell power to other residential owners. Until new regulations are in place, researchers point out that the technology would also benefit businesses equipped with renewable power sources that need constant power and do not have backup generator.
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.