North American Semiconductor Equipment Industry Posts August 2017 Billings
September 25, 2017 | SEMIEstimated reading time: 1 minute
North America-based manufacturers of semiconductor equipment posted $2.18 billion in billings worldwide in August 2017 (three-month average basis), according to the August Equipment Market Data Subscription (EMDS) Billings Report published today by SEMI.
SEMI reports that the three-month average of worldwide billings of North American equipment manufacturers in August 2017 was $2.18 billion. The billings figure is 3.9% lower than the final July 2017 level of $2.27 billion, and is 27.7% higher than the August 2016 billings level of $1.71 billion.
“Equipment billings in August declined relative to July, signaling a pause in this year's extraordinary growth," said Ajit Manocha, president and CEO of SEMI. “Nonetheless monthly billings remain well above last year's monthly levels."
The SEMI Billings report uses three-month moving averages of worldwide billings for North American-based semiconductor equipment manufacturers. Billings figures are in millions of U.S. dollars.
SEMI publishes a monthly North American Billings report and issues the Worldwide Semiconductor Equipment Market Statistics (WWSEMS) report in collaboration with the Semiconductor Equipment Association of Japan (SEAJ). The WWSEMS report currently reports billings by 24 equipment segments and by seven end market regions. SEMI also has a long history of tracking semiconductor industry fab investments in detail on a company-by-company and fab-by-fab basis in its World Fab Forecast and SEMI FabView databases. These powerful tools provide access to spending forecasts, capacity ramp, technology transitions, and other information for over 1,000 fabs worldwide.
The data contained in this release were compiled by David Powell, Inc., an independent financial services firm, without audit, from data submitted directly by the participants. SEMI and David Powell, Inc. assume no responsibility for the accuracy of the underlying data.
About SEMI
SEMI connects over 2,000 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. FlexTech and the MEMS & Sensors Industry Group (MSIG) are SEMI Strategic Association Partners, defined communities within SEMI focused on specific technologies. Since 1970, SEMI has built connections that have helped its members prosper, create new markets, and address common industry challenges together. SEMI maintains offices in Bangalore, Berlin, Brussels, Grenoble, Hsinchu, Seoul, Shanghai, Silicon Valley (Milpitas, Calif.), Singapore, Tokyo, and Washington, D.C.
Suggested Items
Zentech’s Board of Directors Announces the Return of Matt Turpin as President and CEO
04/22/2024 | Zentech ManufacturingTurpin draws upon over 35 years of experience in the electronics industry and has an 18-year history with Zentech. He previously served as President and CEO from 2006 to 2019 after which time he has remained active in the EMS industry as an advisor to Zentech and other industry organizations.
Aaron Woolf, Dylan Peterson Join SIA Team
04/22/2024 | SIAThe Semiconductor Industry Association (SIA) announced Aaron Woolf and Dylan Peterson have joined the SIA team. Woolf will serve as director of global policy for economic security and Peterson will be a communications associate. SIA represents 99% of the U.S. semiconductor industry by revenue and nearly two-thirds of non-U.S. chip firms.
It’s Only Common Sense: OCCAM—the Time Is Now
04/22/2024 | Dan Beaulieu -- Column: It's Only Common SenseOne of my favorite books is a little tome called Who Moved My Cheese? Even those of you who don’t spend a lot of time reading books have at least heard of it and know that it refers to people, especially in business, who are so stuck in their ways that they get upset when something changes. In our business, we know this kind of thinking is especially true. In fact, it always makes me laugh when one of my innovative friends finds a new way to do something and is afraid that someone will steal his idea. I always tell him that no one in our business, especially a PCB engineer, has ever thought about someone else’s innovative idea enough to steal it.
Digitalisation and ESG
04/19/2024 | Marina Hornasek-Metzl, AT&SDigitalisation and ESG are prominent and high-priority topics in the global business community. The first focuses on applying technology throughout the value chain to produce faster, smarter, and more desirable business outcomes. The latter emphasises the broader value a business is expected to create for its stakeholders from an environmental, social, and governance perspective.
Real Time with... IPC APEX EXPO 2024: Looking Back, Looking Forward With IEC
04/19/2024 | Real Time with...IPC APEX EXPOIEC came to the RTW booth and discussed both the legacy of IEC's past and the vision for its future. Industry veteran Bruno Ferri highlighted his quarter-century tenure in the industry and with IEC since its founding. He still exhibits boundless enthusiasm for the industry. Brando Stone, a young professional and a future face of IEC, talked about IEC's plans going forward and his experience at this year's IPC APEX EXPO.