APCT Increases Technology with Rigid Flex Optical Registration from DIS
April 8, 2021 | APCTEstimated reading time: 1 minute
APCT Inc has added Rigid Flex Optical Registration™ (RFS), developed by DIS Inc of Islandia, N.Y. to enhance their PCB registration capabilities. The RFS machine is built specifically to process difficult flex, rigid and rigid-flex jobs. Using DIS, Inc proprietary Optical Registration™ technology in conjunction with SmartWeld, the RFS has the ability to align inner-layers and pre-preg without the use of expensive pin-tooling.
Optical Registration™ allows for optical alignment of inner layers during the lay-up process of multi-layers and sequential build-up technology, eliminating the need to manually punch and pin individual layers prior to lamination. The tolerance build-up and variability associated with traditional pin lamination systems is eliminated.
A vision and positioning system sequentially align and clamp layers together utilizing a full platen, assuring coplanarity and accuracy. The aligned multi-layers are welded together with SmartWeld™, the patented coupled induction welding system developed by DIS Inc.
In addition, Optical Registration™ provides an opportunity to utilize X-ray inspection to quantify registration of welded multi-layers prior to lamination. The panel can then be measured after lamination, providing the data to analyze the lamination process and take corrective actions if necessary.
The process has been in use worldwide at both high tech and high-volume shops over the past several years. Some of the leading-edge requirements placed on PCB shops utilizing pin technologies are not able to be met unless they introduce Optical Registration.
About APCT Inc.
APCT is a leading manufacturer of high reliability rigid printed circuit boards. Located in Anaheim California, the plant is designed to facilitate world class cycle times and support a broad range of technologies. Their corporate culture focuses on continuous improvement and strives for “best in class” in service and support. APCT is ISO9001:2008, IPC 6012 Class III certified and ITAR registered.
About DIS Inc.
DIS Inc. is a worldwide leader in optical registration systems for the printed circuit board industry and an innovative producer of inner-layer/sub-lam registration and welding equipment. DIS has developed Direct Optical Registration™, a new method of optically registering and welding inner-layers/sub-lam such that registration is improved by eliminating mechanical tooling, operational cycle times are reduced and process flexibility is increased all while significantly reducing operating costs.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Looking Back, Looking Forward With IEC
04/19/2024 | Real Time with...IPC APEX EXPOIEC came to the RTW booth and discussed both the legacy of IEC's past and the vision for its future. Industry veteran Bruno Ferri highlighted his quarter-century tenure in the industry and with IEC since its founding. He still exhibits boundless enthusiasm for the industry. Brando Stone, a young professional and a future face of IEC, talked about IEC's plans going forward and his experience at this year's IPC APEX EXPO.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
IPC Bestows Posthumous Hall of Fame Award to Industry Icon Michael Ford
04/18/2024 | IPCIPC honored the late Michael Ford, Aegis Software, for his extraordinary contributions to the global electronics manufacturing industry with the IPC Raymond E. Pritchard Hall of Fame Award at IPC APEX EXPO 2024. IPC’s most prestigious honor, the Hall of Fame Award is given to individuals who have provided exceptional service and advancement to IPC and the electronics industry. Ford, an industry leader and valued IPC volunteer, died suddenly in January 2024.
Two Industry Rising Stars Recognized at IPC APEX EXPO 2024
04/17/2024 | IPCTwo of the industry’s best and brightest were presented with an IPC Rising Star Award at IPC APEX EXPO 2024 in recognition of their leadership roles and support of IPC standards, education, advocacy, and solutions to industry challenges. Award recipients were Naim Kapadia and Michael Schleicher.