-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Barry Olney’s High-Speed Simulation Primer
April 9, 2021 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
The I-Connect007 editorial team recently spoke with Barry Olney of iCD about simulation. Barry, a columnist for Design007 Magazine, explains why simulation tools can have such a steep learning curve, and why many design engineers are still not using simulation on complex high-speed designs.
Barry also highlights common mistakes that design engineers make using simulation tools, and he offers a variety of tips and techniques for anyone dealing with simulation challenges. Among them: Don’t trust reference designs and datasheets.
Andy Shaughnessy: What are some of the biggest problems in simulation? In our surveys, engineers say that they have trouble doing simulation and analysis. What is so tough about it?
Barry Olney: I think the biggest problem, Andy, is time, and that’s the same with PCB design in general. The PCB design is the last process in the design flow, and when I get a job for a board layout, it’s already behind schedule. I’ve never ever had a job where it was on schedule and everything was running smoothly. So, you’re pushed for time during the whole process, and to add simulation on top of that, that pushes it back another week or so. Management is reluctant to do it because they think, “Well, it may work and then we can get it through just a little bit behind schedule, but if we leave it another week then it delays things even further.” It seems they don’t have time to do it right the first time, but they’ve got the time for a re-spin.
A lot of engineering managers actually schedule in a re-spin because they believe they need at least two iterations before they get a working product. So, time is the biggest factor. That’s why they generally tend to skip simulation. There’s also the learning curve associated with the high-end tools that requires experience—not just with the tools, but with high-speed design rules. Sourcing IBIS models is another big issue. Maybe you can’t find the model, so you have to compromise. IC vendors are now supplying most IBIS models, but for FPGAs, in particular, if you get the default IBIS model from the vendor’s website, it has a default pin assignment, but once the EE places and routes the actual FPGA chip, you need to redefine the pin assignments for each signal.
Now, the pin assignment of the FPGA that someone designs isn’t the same as the one on the IBIS model, and that’s where it all goes haywire. You think, “That simulation is simple. You just have to import the IBIS models into the transmission line model and click Go.” That should happen, but, it doesn’t. Where you don’t have pin assignments matching, you have to manually select the required FPGA sub-models from the thousands of pins with 50 or so sub-models. And these have all got cryptic names that are different for each IC vendor. So, you actually have to find the model or driver model that matches the transmission line that you’re trying to simulate. Or maybe you cannot find the model at all. Good luck sourcing a connector model. So, again, this all takes time. It took me years to figure out how to do it properly, quickly, and efficiently.
To read this article, which appeared in the April 2021 issue of Design007 Magazine, click here.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
On the Line With... Podcast Talks With Cadence Expert on Manufacturing
04/18/2024 | I-Connect007In “PCB 3.0: A New Design Methodology: Manufacturing” Patrick Davis returns to the podcast to talk about design rules. As design considerations become more and more complex, so, too, do the rulesets designers must abide by.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.