Ansys, Innoviz Technologies Enable Autonomous Driving Revolution with Next-Gen LiDAR Design
January 6, 2022 | ANSYSEstimated reading time: 2 minutes
Innoviz Technologies is using Ansys simulation solutions to successfully drive the technology behind their unique automotive-grade LiDAR sensor and achieve autonomy for their customers—while reducing development time and costs. Ansys enables Innoviz Technologies to meet their customers’ objectives for durability, reliability, and affordability in a LiDAR design that is seamlessly integrable into Level 3-5 autonomous vehicles.
A study from the U.S. Department of Transportation’s National Highway Traffic Safety Administration found the majority of serious crashes are caused by human error, a statistic that is incentivizing autonomous vehicle development to improve safety on the road. Autonomous vehicles depend on the sensing capability of various components, including LiDARs, radars and cameras. LiDAR delivers the high-resolution, long-range 3D image perception needed to safely guide vehicle movement. The challenge for automotive manufacturers is that available LiDARs are not close to meeting industry standards for performance, size, reliability, and cost perception. Packaging these very complex optical sensor technologies tied to numerous systems presents challenges in both their production and operation.
The success of the team depended on simulation and testing of various aspects of LiDAR design and optics. Drawing on the power of Ansys multiphysics capabilities, Innoviz relied on Ansys® Mechanical™, Ansys® Fluent®, Zemax and Ansys® Maxwell® simulation software, working seamlessly together to successfully address LiDAR system complexity. Through extensive simulation and testing, an extreme integration of components into a single chip was accomplished requiring minimal design iterations and enabling a more compact LiDAR system. This high-performance, reliable LiDAR solution meets the necessary automotive performance characteristics and size requirements manufacturers are looking for at a much lower price point.
“We use many types of simulations in the Ansys ecosystem across the entire design chain of our product,” said Oren Buskila, chief R&D officer and co-founder at Innoviz. “We rely on Ansys capabilities to run structural analysis to understand the stresses and temperature variations of our chips. We also use Ansys for dynamic simulation to understand vibration characteristics, and thermal simulation to see if we can dissipate the amount of power from the main components inside, like the laser. Ansys provides excellent simulation software and we value their experience in the automotive space to help us solve our biggest design challenges.”
“Our vast simulation and growing multiphysics capabilities support exploration and discovery in advanced autonomous technologies,” said Shane Emswiler, senior vice president of products at Ansys. “More complex optical applications like LiDARs require a higher degree of predictive accuracy in their execution. Our tools interface well, both inside and outside our product portfolio, to help our customers quickly move through design cycles with confidence. Simulation software is a game changer in the development of a new generation of more complex LiDAR systems that will accelerate autonomous vehicle adoption.”
Suggested Items
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Altus Group Helps BitBox Unlock Productivity and Efficiency Gains with New Reflow Oven
04/22/2024 | Altus GroupAltus Group, a leading provider of capital equipment, has recently assisted BitBox, a UK-based electronics design, engineering and manufacturing company in upgrading its operations with the implementation of a new reflow oven from Heller Industries.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.