Graphite-based Direct Metallization for Fabrication of Complex Interconnect Designs


Reading time ( words)

Introduction

The technology trends are unmistakable, such as the need to move into higher functionality while reducing footprint of the PWB substrate. In turn, this triggers circuit designs with smaller vias, blind, buried and stacked vias, as well as any-layer technology. In addition, there is a call-out for more flexible and rigid-flexible printed circuit boards. Complicating matters for the fabricator is the proliferation of material sets designed to support the low-loss, high-frequency market segment. With all of these changes, along with heightened emphasis on end-product reliability and productivity, metallization performance is under the highest scrutiny. 

Direct Metallization

Direct metallization of boards is a predominant process in flex circuit and microvia manufacture. This conveyorized process is fast and efficient. However, in North America, direct metallization is not as common as in overseas marketplaces, most likely reflecting the higher percentage of flex and microvia in the production mix. Regardless, direct metallization processes (most) offer lower consumption of resources over conventional electroless copper. This includes reduced rinse water and waste treatment concerns, lower power consumption as well as fewer chemical processes to maintain. For most direct metallization systems including graphite based processes, the equipment footprint is quite small when compared to a conventional electroless copper line of equal productivity. This is indeed an advantage with respect to capex utilization and return on assets.

Read the full article here.


Editor's Note: This article originally appeared in the May 2014 issue of The PCB Magazine.

Share

Print


Suggested Items

Benchmarking Your Process Engineering

04/29/2021 | I-Connect007 Editorial Team
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design. In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.

Isola Releases IS550H Material

04/26/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Michael Gay of Isola and Chris Hunrath of Insulectro about the release of their new halogen-free, high-thermal reliability material, which they hope fills the gap in the market between epoxies and polyimides.

EIPC Technical Snapshot: Supply Chain and Material Price Pressures

04/26/2021 | Pete Starkey, I-Connect007
EIPC’s seventh Technical Snapshot webinar on April 14 was timely and appropriate. In the context of current supply chain issues and material price pressures facing the PCB industry, particularly in Europe, the EIPC team brought together an outstanding group of experts—each a leading authority in his field—to analyse and comment upon the areas of concern and to respond to questions raised by a capacity audience. As Alun Morgan said, “If you don’t use the European supply chain, you won’t have it anymore!”



Copyright © 2021 I-Connect007. All rights reserved.