IMPACT 2014 - IPC on Capitol Hill


Reading time ( words)

Author's Note: The views expressed in the following recap of the IPC IMPACT 2014 event held June 10-11 are solely my own. In keeping with IPC’s long-standing commitment to open dialogue by and between its members, no direct quotes or personal views from any IPC members are referenced in this article.

 

Although I am a Washington, D.C. native and reside in the D.C. suburbs, I must admit it was difficult not to get excited in advance about spending two days in downtown Washington on Capitol Hill at IMPACT 2014, talking circuit boards with both politicians and my industry peers alike!

As an industry, we face many challenges and obstacles in our pathway to success and IPC’s IMPACT 2014 offered the opportunity to meet key members of Congress, policymakers and influencers, educate them about needed actions to strengthen the electronics sector and the overall economy and national security, and network with industry colleagues.

IPC delivered superbly on all accounts.

I last attended IPC Capitol Hill Day in 2011, and while that was an outstanding event as well, it was clear this time around that IPC had redoubled its commitment to public policy engagement. In January of this year, IPC’s Government Relations and Environmental Policy office moved from its former Arlington, Virginia, location into the heart of D.C. This prestigious Pennsylvania Avenue location is just blocks away from both the White House and Capitol Hill. No big surprise, as a government outreach and member advocacy presence here clearly pays dividends. This was reflected in the steady stream of high-level meetings with senators, representatives, and White House staffers that the IPC Government Relations team arranged for our IPC member delegation.

Read the full column here.


Editor's Note: This column originally appeared in the July 2014 issue of The PCB Magazine.

Share




Suggested Items

A Focus on Process Control, Part 1

09/27/2022 | I-Connect007 Editorial Team
Michael Carano is a noted subject matter expert with respect to process control, electroplating and metallization technology, surface finishing, and reliability. So, it was only natural that we sat down to talk about mechanizing an existing facility given today’s fickle environment. Will any of the CHIPS funding trickle down to bare board fabrication? What process can be adjusted on the factory floor? The focus needs to be more than just on manufacturing and getting work out the door, he says, but also process control.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

09/23/2022 | Andy Shaughnessy, Design007 Magazine
It’s officially fall now, and in Atlanta the temperature has plummeted to the mid-80s. We’ve all bumped our air conditioners up to 74 degrees. That means it’s trade show season, and I’ve been busy looking for my suitcase. This week, we have an assortment of news about associations, education, and advocacy, as well as another installment of our Printed Electronics Roundtable. And if you’re looking for a job, you are in luck; our jobConnect007 section is chock-full of open positions at all levels in this industry.

IPC: Companies Are Intentional About Tracking Environmental and Social Risks

09/22/2022 | Suhani Chitalia and Kelly Scanlon, IPC
Leading companies in the electronics manufacturing industry are highly intentional about their environmental, social and governance (ESG) priorities, with climate change and energy use among the most closely scrutinized issues, an IPC analysis shows. As part of IPC’s ESG for Electronics initiative, IPC is interested in developing resources for members on the most common ESG methods and priorities of leading companies across the electronics value chain. In support of this, IPC has preliminarily analyzed the ESG reports of approximately a dozen companies in selected portions of the industry.



Copyright © 2022 I-Connect007. All rights reserved.