-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC Plating Sub-committee 4-14: Surface Finish Specifications
May 27, 2015 | George Milad, UyemuraEstimated reading time: 1 minute
IPC specifications are reference documents to be called out by designers and OEMs. Designers may take exception with one or more items in the specification to ensure that the product meets the requirements of its intended use. The acronym AAUBUS (as agreed upon between user and supplier) is part of any specification.
Specifications are consensus documents. They are agreed upon by a panel of interested industry participants composed of suppliers, manufacturers, assembly houses (CMs) and end-users. The IPC Plating Sub-committee 4-14 is no exception.
When there is consensus, the committee documents it in a specification. In cases where no consensus is readily arrived at, the committee undergoes its own testing in what is commonly referred to as a round-robin (RR) study. In an RR investigation, an agreed-upon test vehicle (TV) is designed and manufactured. TVs are then sent around to the different suppliers who deposit the agreed upon thicknesses to be investigated. The TVs are collected and the deposit thicknesses are verified and documented. The TVs are then coded. The TVs are sent around again to the different testing sites that test for the desired attribute like soldering, contacting and wire bonding capabilities of different finish thicknesses. The data is then collected, sorted out and documented. At this point, a new attempt at consensus is made and upon arrival, the thickness specification is set.
A draft is prepared after consensus is complete. The draft is then posted for peer review. Any IPC member can review the document and suggest technical or editorial changes. All comments are then reviewed and all issues resolved before the final draft is issued. At this time the IPC takes on the task of publishing the document in its final format.
The IPC Plating Sub-committee 4-14 has been active since 2001. It is co-chaired by me and Gerard O’Brien of ST and S Group. The IPC liaison is Tom Newton. The sub-committee has an extensive member list composed of OEMs, contract assemblers, board manufacturers, and chemical suppliers, as well as labs and consultants.
To read this entire article, which appeared in the April issue of The PCB Design Magazine, click here.
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
ASMPT to Exhibit Smart Manufacturing at IPC APEX EXPO 2024
03/27/2024 | ASMPTWith its innovative, data-driven Intelligent Factory concept and a comprehensive hardware and software portfolio around SMT production, market and innovation leader ASMPT will be a major presence at the IPC APEX EXPO 2024, the industry’s main event in California.
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.
TRI Launches New Advanced Packaging 3D CT AXI Solution
03/26/2024 | TRITest Research, Inc. (TRI) proudly announces the launch of the SEMI 3D CT AXI solution, TR7600F3D SII Plus, marking a paradigm shift in precision and reliability for high-reliability electronics manufacturing, such as the Advanced Packaging Industry.
Blackfox Ready for IPC APEX EXPO 2024
03/26/2024 | Andy Shaughnessy, I-Connect007Blackfox Training Institute offers IPC-certified training for a myriad of PCB assembly techniques and standard certifications. With many technologists beginning to eye retirement, this training is at a premium. I recently spoke with Jamie Noland, director of training and education for Blackfox, about the company’s latest educational efforts, and his plans for the upcoming IPC APEX EXPO, where Blackfox will be exhibiting.