Engineered Material Systems Introduces DF-3005


Reading time ( words)

Engineered Material Systems, Inc., a leading global supplier of negative photo resist materials for MEMS and IC cooling applications, is pleased to introduce the DF-3005 Dry Film Negative Photo Resist for use in micro-electromechanical systems (MEMS) and wafer level packaging applications (TSV sealing). This material formulation has been optimized for hot roll lamination and processing on MEMS and IC wafers.

DF-3005 is available in other thickness formats from 5-50 µm, ±5 percent. The cured chemistry can withstand harsh environments including resistance to extreme moisture conditions and corrosive chemicals. The DF-3005 film is tougher (less brittle) than most negative photo resists on the market with a glass transition temperature of 158°C (By DMA Tan Delta) and a moderate modulus of 3.5 GPa at 25°C. It is hydrophobic in nature providing for chemical and moisture resistance. DF-3005 is compatible with and can be used in contact with the EMS line of spin coatable photoresists.

DF-3005 is the latest addition to Engineered Materials Systems’ full line of film and liquid negative photo resists formulated for making microfluidic channels on MEMS devices and integrated circuits.

For more information about the DF-3005 Dry Film Negative Photo Resist or to learn how Engineered Materials Systems can define, develop and create an engineered material solution that is right for your company, visit www.emsadhesives.com

About Engineered Material Systems

Engineered Materials Systems, Inc. (EMS) technology focus is on electronic materials for semiconductor, circuit assembly, photovoltaic, printer head, camera module, disk drive and photonics assembly product lines. The company creates continual improvements that will guide its customers into the future. For more information, visit www.emsadhesives.com.

 

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 3

04/22/2021 | Brent Fischthal, Koh Young America
Initiatives like the IPC Connected Factory Exchange (CFX) and IPC-Hermes-9852 underpin efforts within the industry to develop standards and help create a smart factory. These M2M communication standards, guided in part by Industry 4.0, are altering the manufacturing process by improving metrics such as first pass yield and throughput by applying autonomous process adjustments.

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/14/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.



Copyright © 2021 I-Connect007. All rights reserved.