Eliminate Connectors with Sculptured Flex


Reading time ( words)

In a previous column, I discussed connectors for flexible circuits and the various options that are available. One of the options is very popular because in reality it is a “connector-less” connector. The connector pins are actually fabricated as part of the flexible circuit, as opposed to being an assembled component.

This option uses sculptured flex. A sculptured flexible circuit has unsupported metal traces.  These protruding traces act as the male pin part of the connector. The technology for fabricating a sculptured circuit is fairly unique in the industry.    All Flex starts with thick copper (as thick as 7 ounces which can be plated up from there with copper, tin, solder, gold or other metals). The rest of the traces are etched down to achieve thicknesses that are consistent with good flexibility. Back-bared fabrication is used so that there is no need to remove the dielectric with laser ablation or routing. To fabricate a back-bared flexible circuit, the base dielectric is pre-punched or drilled to expose the metal traces that will form the connector pins.

Sculptured_Flex2.JPGFigure 1: Sculptured flexible circuit.

 Sculptured circuits have a number of advantages:

  • Better reliability: There is no assembly or junction point that could weaken so these connector pins hold up better to vibration testing or thermal cycling.
  • Less costly: The connector component is eliminated along with the labor to attach it.
  • Weight and space: Because a connector component is eliminated, the flexible circuit assembly weighs less and takes up less space.
  • Configurability: There are significant choices in terms of number of pins, density of pins and even thickness and length. They can be bent for 90-degree or 45-degree insertion.
  • Surface finishing: Leads can be plated with tin, tin-lead, gold or other surface finishes.

Sculptured_Flex1.JPGFigure 2: Actual sculptured flex circuit.

Any time you eliminate a component, hidden costs are eliminated, such as the cost of stocking, tracking and managing the supply chain for that part number. When designing an electronic package, don’t assume that you need a component for every connection point. Sculptured flex will give some options that can make your electronic package, lighter, less costly, more reliable, and take up less space.

Dave Becker is vice president of sales and marketing at All Flex Flexible Circuits LLC.

Share

Print


Suggested Items

Benchmarking Your Process Engineering

04/29/2021 | I-Connect007 Editorial Team
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design. In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.

EIPC Technical Snapshot: 5G and Loss Minimisation

03/26/2021 | Pete Starkey, I-Connect007
Bringing a specialised technical area into sharp focus, this month’s topic was “5G and the understanding of loss minimisation at the PCB level,” with papers on dielectric material, copper foil, and modelling solutions. The webinar was moderated by EIPC board member Paul Waldner managing director of Multiline International Europa, who admitted that he had managed to get a haircut especially for the occasion!

PCB Requirements for E-Mobility

03/23/2021 | I-Connect007 Editorial Team
Nolan Johnson, Barry Matties, and Happy Holden speak with Christian Klein, section manager for PCBs in the automotive electronics division, about Bosch’s recent presentation on PCB requirements of the future in regard to automotive and electro mobility trends and challenges.



Copyright © 2021 I-Connect007. All rights reserved.