-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Supply Chain Challenges and Opportunities
August 12, 2015 | David Ledger-Thomas, Honeywell AerospaceEstimated reading time: 1 minute
Let’s start by defining exactly what a supply chain is. It’s not a nautical term for an anchor chain, or a dynamic part of a chainsaw that never runs out of chain.
No, it’s a key term used in the organization of resources which may form a system between entities. Now this sounds a little closer to something that may be utilized in producing an electronic end-item, in our case, a printed circuit board.
Some prepared formal definitions supplied by a couple of Internet sources:
Wikipedia: “A supply chain is a system of organizations, people, activities, information, and resources involved in moving a product or service from supplier to customer.”
Investopedia: “The network created amongst different companies producing, handling and/or distributing a specific product. Specifically, the supply chain encompasses the steps it takes to get a good or service from the supplier to the customer. Quite often, many people confuse the term logistics with supply chain. In general, logistics refers to the distribution process within the company whereas the supply chain includes multiple companies such as suppliers, manufacturers, and the retailers.”
Those formal words are rather nice, but let’s reel this in a bit to focus on PCB design. What does supply chain management have to do with PCB design?
Just so we are all in a similar frame of mind, PCB design data contributes to the fabrication of a printed circuit board. The PCB mechanically supports and electrically connects electronic components using conductive (usually copper) traces, pads, vias and other features etched from copper sheets laminated onto a non-conductive substrate or dielectric material.
First, let’s take a look at the supply chain from the point of view of PCB design as its own organization or function. Who would be the suppliers and customers, and what is required for success? In this gander, PCB design and layout supplies only board software outputs and drawings.
But is that all there is? No, there is much more interaction required to have a successfully completed, working PCB assembly ready to be installed in the end-product.
To read this entire article, which appeared in the July 2015 issue of The PCB Design Magazine, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.