-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Nick Barbin: From Designer to EMS Company Owner
August 13, 2015 | Andy Shaughnessy, PCBDesign007Estimated reading time: 6 minutes
Many PCB designers would rather do just about anything than pore over a P&L spreadsheet. But Nick Barbin isn’t a typical designer. He co-founded the design bureau Optimum Design Associates over two decades ago, and the company later expanded into contract manufacturing and Lean processes. I caught up with Nick recently and asked him how he wound up leading an EMS company on the Inc. 5000 list.
Andy Shaughnessy: Nick, tell us a little about how you got into PCB design.
Nick Barbin: In 1984, I had just received my degree in liberal arts and was looking for what I was going to do next. I initially thought I might follow my dad into the firefighting profession, but was also intrigued by a family member that had a cool job working in the electronics industry as a PCB designer. I became quite the persistent pest until my uncle, Steve Roland, finally relented and got me a job working the graveyard shift pen plotting individual PCB layers for the QA department of a large service bureau called Royal Digital, located in Silicon Valley. After a year or so of this, I was promoted to the digitizing group (digitally inputting PCB designs) where I really took to it and became quite proficient at it.
After three years or so of digitizing, the service bureau suddenly shut their doors and I was out of a job. This actually was quite fortunate for me because at the time, I was not designing boards, but just copying them. Uncle Steve came through for me again and referred me to the man who would become my mentor, Mike Pfeil (older brother of Mentor’s Charles Pfeil), who had started a service bureau called Arrow Design down in the Los Angeles area. I got the job, packed my few possessions and moved south to learn design from the master. The other cool part was that I was going to learn design using a new CAD software tool called Cadnetix. Working for Mike, under his tutelage, I learned techniques based on buss flow that enabled me to quickly place and route hundreds of boards. This gave me a great foundation for the rest of my design career.
Shaughnessy: When did you open Optimum Design Associates?
Barbin: Optimum began back in 1991 with three partners, Roger Hileman, Steve Roland and me in a small lobby of a building in Milpitas, California that was owned by a limited partner who loaned us $25,000 to get started. We were fortunate to find work right away, but it still took us six months before any of us received a paycheck. A few years later, Steve decided to move out of the area and exit the partnership, leaving just Roger and me as 50/50 owners.
Shaughnessy: PCB designers are famous, or infamous, for ignoring the business side and concentrating on their design work. What inspired you to make the entrepreneurial leap?
Barbin: I’ve always been a bit ambitious, so even though I’ve always had a love and passion for PCB design, I also wanted a business that I could grow as well. Fortunately, Roger had his own design business prior to Optimum,early on; I was able to focus on design while he took care of most of the administration and financial parts of the business.
Shaughnessy: You have quite a few Top Gun winners on staff, don’t you?
Barbin: Yes, very proud to say we’ve had a total of eight Top Gun winners, but I honestly believe all my senior designers are Top Guns. They are extremely well versed in what drives signal integrity and manufacturability, and they are able to balance the two extremely well. With technology always changing, speeds continuously getting faster, and software tools evolving, our designers are always learning new techniques and processes to improve their skills.
Shaughnessy: What led you to get into contract manufacturing?
Barbin: Optimum first got involved with EMS by taking on projects for customers who were asking for a full-turnkey solution. We initially did this by outsourcing to an EMS partner. It was really an eye-opening moment to see the contrast between full turnkey manufacturing revenue and design layout revenue. Based on that revelation, I put together a business plan for the EMS business and started our transition into what we are now, a diversified EMS company providing design and assembly services.
Shaughnessy: What would you say is the sweet spot for your company?
Barbin: It’s actually quite different between our business units. For EMS, we are very good at mid-volume SMT production and related system integrations for customers with $1–10 million in annual spend. In design, we truly differentiate ourselves on highly constrained mixed-signal technology and RF boards. With engineering, we have a multi-disciplined team that’s focused on providing project support that includes: circuit design, simulation, FPGA design, test, and integration. The library team is easy; all they want to do is build schematic symbols and footprints for anyone who wants it.
Shaughnessy: On your website, one of the values you list is “Give customers the same advice we’d give our mom.” That’s a bold statement. How do you put that into everyday operations?
Barbin: Our customers are like family, so we are committed to giving them the highest quality service and providing them with information that is in their best interest. This is culturally instilled throughout our organization and can be seen in the various ways we interact with our customers. One such way is in how we price our EMS services. We are big advocates of the “should cost” model in which we partner with our customers to get the lowest material price from the various distributors and manufacturers and then use accepted labor rates for our region. This gives our customers a lot of control and transparency over the pricing we provide them.
Shaughnessy: What are some of the biggest challenges a company like yours faces?
Barbin: Adding new customers that are the right fit. We can’t be everything to everyone so we are extremely focused on finding customers that we can excel with. For the EMS business the sales cycle can generally take 12–18 months before you see any kind of significant production, so it’s extremely important and critical to keep a strong active pipeline of new prospects.Page 1 of 2
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.