Two-for-one Device Houses Right Radio at Right Time
August 18, 2015 | U.S. ArmyEstimated reading time: 3 minutes
A little innovation can go a long way towards helping U.S. military forces successfully facilitate their missions. Even an apparatus no bigger than a breadbox recently solved a challenge involving two radios and the need to make their transport lighter.
The U.S. Special Operations Command, or SOCOM, required a solution that would allow its forces to mount AN/PRC 117G and Rover 6 radios to a vehicle, yet still conform to strict size and weight limitations. Both radios performed key functions, yet both were not always needed on each mission.
"Instead of designing two separate radio mounts, our engineers created a universal two-radio mount design that swivels to expose two separate mounting brackets," said James Shannon, the project's lead for the U.S. Army Communications-Electronics Research, Development and Engineering Center, or CERDEC.
The center's Command, Power and Integration, or CP&I, Directorate led the effort for CERDEC and leveraged its Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance, or C4ISR Prototype Integration Facility, or PIF, to complete the requirements.
To meet airlift weight restrictions for multiple types of aircraft, the C4ISR integration design had to adhere to a strict 150-pound weight limit. Space restrictions throughout the platform meant that the radio mounts had to be in close proximity of each other.
PIF engineers drew upon their extensive experience designing radio mounts to determine that it would be impossible to design two mounts that would meet these requirements along with their auxiliary components. By eliminating one entire mount and a set of power cables, the design reduced the vehicle's weight by approximately 25 pounds.
"That doesn't sound like much weight, but the reduction means the aircraft can fly farther and the vehicle can carry more ammunition, fuel, food and water, which are critical provisions for any mission," Shannon said.
Another benefit to the swivel mount is its ease of use. The design ensured that each mounting bracket with their separate power interface blocks conformed to fit each radio's size and shape.
"We designed the mount so that with a simple turn, the user can mount the desired radio in five to 10 seconds, with no tools required," said Dan Smith, CERDEC engineer.
The entire design, fabrication, and integration for the radio mount took place in the PIF, which provides full-service engineering support for shelter, vehicle, aircraft, watercraft and Soldier prototype C4ISR systems. Government organizations can collaborate with PIF engineers by using an iterative development process to refine technologies prior to establishing set requirements.
"Product manager or science and technology organizations can use the PIF's soup to nuts engineering services to help prove out a product's manufacturability," said Christopher Manning, division chief of CERDEC's CP&I Prototyping, Integration and Testing Directorate. "We provide a tech data package that our customers can turn over to an Army depot such as Tobyhanna for full-rate production, or they can release the package to industry under the competitive bidding process."
Engineers began designing the radio mount by using a 3-D computer-aided design, or CAD, program. The design was then entered into the computer-aided manufacturing machining software program, which simulates an entire design build, identifies process errors and provides specific instructions to the Computer Numerical Control, or CNC, machine for the actual product build.
Many CAD designs initially "become real" as plastic iterations produced from the PIF's 3-D printer, but the engineers' previous experience creating radio mount interfaces allowed them to skip this step to begin the actual product build. The CNC machine produces parts that are accurate to within 1/1000th of an inch, then converts a heavy aluminum block into a two-pound radio mount in less than two hours.
Customer-specific designs, such as the radio mount, are often applicable to other customers' needs, especially those looking to reduce size, weight and power on their platforms. With some minor tweaks, the universal radio mount could work in multiple platforms, Shannon said.
"Our customers approach us with challenges such as these where they are not entirely sure how to close the gap between a concept and a solution," Manning said. "By keeping an open mind and through outside-the-box thinking, our engineers have the latitude to excel through innovation."
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.